EMEA
MACHINES Mar 2002
9402-40S
IBM AS/400 Advanced Server Model 40S
·
Abstract
·
Model
·
Maximum
·
Features
-- Specify/Special/Exchange
·
Special
Feature Codes -- Chargeable
·
Supplies
AS/400 Advanced Server 4XX and 5XX models have
IBM's PowerPC AS microprocessors. You can move to the new technology without
rewriting or recompiling your applications, providing observability has been
retained. AS/400 Advanced Servers are continually enhanced in capacity and
performance to satisfy growing client/server requirements.
Tools for system management and application
development meet the requirements of customers who wish to implement advanced
client/server application solutions without the complexity or support staff
normally associated with other server platforms, saving operational cost and implementation
time. With increased capacity and performance, AS/400 Advanced Servers provide
high-function, high-reliability server capabilities for your client/server
applications.
Easy-to-order, packaged solutions for AS/400
Advanced Server Model 40S, contain hardware and software. Small, entry, growth,
and large server packages combine specific processors and features with OS/400
and several popular licensed programs. The software is preloaded (where
available). You can order larger processors and additional features at
published prices. Complete package prices are lower than comparable
custom-configured systems.
Model Abstract 9402-40S: (For IBM US, No Longer Available as of June 30,
1998)
The IBM 9402 Model 40S has a base main storage
capacity of 32 MB and a base DASD capacity of 1.96 GB.
·
IBM's AS/400 Advanced Servers with PowerPC AS
microprocessors offer more:
o
Processor performance
o
Main storage
o
DASD capacity
Base System Description - Model 40S
AS/400 Advanced Server Model 40S system units
shipped from the plant, contain the system processor, main storage,
Multi-Function I/O Processor (MFIOP), integrated DASD, an integrated CD-ROM
drive, a communications adapter for Electronic Customer Support (ECS), one LAN
adapter or FSIOP and a workstation controller or a Client Access Console
adapter to support a system console.
The AS/400 Advanced Server structure provides
the ability to select the system processor from several options. The options
available for each model provide different levels of performance to match your
requirements.
The Multi-Function I/O Processor provides
support for disk storage, diskette, CD-ROM, internal tape, workstations
(displays/printers) and communication line ports.
The first communication line port is standard
and is equipped with an EIA 232/V.24 adapter that can be used with IBM's
Electronic Customer Support (ECS) facility. Some optional adapters provide two
communication line ports.
Optional communication line ports on the
Multi-Function I/O Processor, are available with EIA 232/V.24, X.21 or V.35
adapters. The Multi-Function I/O Processor supports async, BSC, SDLC, X.25
Protocols and X.21 Short Hold Mode function.
Included in the base system unit on both new
and MES upgrade systems, is one 1.96 GB 3 1/2-inch disk unit.
A workstation controller or a Client Access
Console feature is included in the base system to support a system console. One
must be selected on the initial order. The workstation controller supports
either twinaxial, ASCII or LocalTalk devices. The Client Access Console adapter
supports a PC.
A total of seven active fixed function
displays are supported. This includes any combination of the following: 5250
twinaxial type displays attached directly to the system or from remote
locations via a remote controller; ASCII type displays directly or remotely
attached; personal computers with 5250 emulation software (Enhanced 5250
Emulation Program, S36/38 Workstation Emulation Program, Remote 5250 Emulation
Program); 3270 type displays attached via controllers, the Host Command
Facility (HCF) or Network Routing Facility (NRF).
PCs with LU6.2 type connections such as AS/400
PC Support Workstation Function or RUMBA/400 sessions do not count toward the
total maximum.
The base system includes one LAN adapter. One
of the following LAN adapters may be included in the base system at no charge:
or, one of
the following adapters may be included in the base system for an additional
charge:
AS/400 Advanced Server Model 40S system users
can reduce the impact of utility power interruptions and the associated system
recovery activities by using the optional 9910 Uninterruptible Power System.
Because of the important contribution this feature can have toward improved
system availability, it is highly recommended.
System Performance Information
The performance of AS/400 models is provided
using a new workload called Commercial Processing Workload (CPW). RAMP-C was
used in the past. Changes in customer environments and dramatic growth both in
the raw performance and system capacity of AS/400, driven by PowerPC
technology, reduce the effectiveness of the RAMP-C workload measurements.
CPW is based on a more sophisticated
transaction processing workload. Derived from TPC-C, it is more representative
of industry standard benchmarks than is RAMP-C. The CPW workload is a modified
implementation of the TPC-C workload and not representative of IBM's or other
vendor optimized implementations. For comparison purposes, an AS/400 9404 Model
B10 has a CPW value of 2.9, for the interactive environment.
A document called AS4CPW is available. The
purpose of this document is to cover the following topics in transitioning to
the new performance metric:
When using this document you should also have
access to the AS/400 Performance Capabilities Reference for PowerPC Technology.
AS/400 Advanced Server Package Offerings
The packaged offerings, available on new
system orders only, are priced lower than custom configurations. The combined
hardware/software packages are not intended to be used when upgrading from
AS/400 CISC (IMPI) systems to AS/400 RISC systems.
Unless specified otherwise, all features
listed must be on the order to receive the package price. You can order
additional features at published prices. No deletions may be made from the
defined packages. Some substitutions may be made as described with each package.
Software included in the combined
hardware/software packages will be preloaded (except in Canada and Latin
America).
Base Packages
off
Small Entry Growth Large
----- ----- ------ -----
Combined Hardware/Software Packages
Packages 4SS 4SE 4SG 4SL
Processor Feature 2109 2109 2109 2109
Memory (MB) 32 32 64 96
DASD (GB) 4 4 8 12
Tape 2.5GB QIC 2.5GB QIC 2.5GB QIC 7.0GB 8mm
IOP Memory (MB) LAN 32 64 64
Software Group P05 P05 P05 P05
Combined Hardware/Software Performance Packages
Packages 4TG 4TL
Processor Feature 2112 2112
Memory (MB) 128 128
DASD (GB) 8 12
Tape 2.5GB QIC 7.0GB 8mm
IOP Memory (MB) 64 64
Software Group P10 P10
Hardware Only Packages
Packages 4HS 4HE 4HG 4HL
Processor Feature 2109 2109 2109 2109
Memory (MB) 32 32 64 96
DASD 4 4 8 12
Tape 2.5GB QIC 2.5GB QIC 2.5GB QIC 7.0GB 8mm
IOP Memory (MB) LAN 32 64 64
Software
Operating System/400 (OS/400)
Client Access for OS/400
Query for OS/400
DB2 Query Manager and SQL Development Kit for OS/400
All required features and programs will be included by the order
configurators. Some substitutions of processor and communications
features are allowed on some packages as defined by the configurators.
Terms and Conditions
·
These packages must be ordered complete with all
required hardware and software features and programs as specified.
Group
P05 - 5
Group
P10 - 30
Optional Features
Features Orderable for Model 40S
off
Feature | Model|
Code Description | 40S |
----- --------------------------------|------|
0032 High-Speed Modem | X |
0033 IGN/400 | X |
0059 Transition Data Link (TDL) | X |
0202 Staged Upgrade Offering | |
0325 IPCS Extension Cable for NT | X |
0329 V.24/EIA232 80-Ft Cable | X |
0330 V.24/EIA232 20-Ft Cable | X |
0331 V.24/EIA232 50-Ft Cable | X |
0334 V.24/EIA232 80-Ft Enh Cable | X |
0335 V.36/EIA449 20-Ft Cable | X |
0336 V.36/EIA449 50-Ft Cable | X |
0337 V.36/EIA449 150-Ft Cable | X |
0338 V.35 20-Ft Cable | X |
0339 V.35 50-Ft Cable | X |
0340 V.35 80-Ft Cable | X |
0341 X.21 20-Ft Cable | X |
0342 X.21 50-Ft Cable | X |
0400 Preload SAP R/3 | |
1109 Single Disk Kit (988 MB) | X |
1379 1.2 GB 1/4-Inch Tape Kit | X |
1380 2.5 GB 1/4-Inch Tape Kit | X |
1602 Single Disk Kit (1.03 GB) | X |
1603 Single Disk Kit (1.96 GB) | |
1700 IPCS Keyboard/Mouse for NT | X |
2109 Model 40S Processor | X |
2110 Model 40S Processor | X |
2111 Model 40S Processor | X |
2112 Model 40S Processor | X |
2120 Model 50S Processor | |
2121 Model 50S Processor | |
2122 Model 50S Processor | |
2154 Model 53S Processor | |
2155 Model 53S 2-Way Processor | |
2157 Model 53S 4-Way Processor | |
2605 ISDN Basic Rate Adapter | X |
2609 EIA 232/V.24 Two-Line Adapter | X |
2610 X.21 Two-Line Adapter | X |
2612 EIA 232/V.24 One-Line/A | X |
2613 V.35 One-Line Adapter | X |
2614 X.21 One-Line Adapter | X |
2617 Ethernet/IEEE 802.3 Net Adapt | X |
2618 Fiber Distrib Data Intf Adapt | X |
2619 16/4 Mbps Token-Ring Adapter | X |
2621 Removable Media Device Attch | X |
2623 Six-Line Comm Controller | X |
2624 Storage Device Controller | X |
2628 Crypto Processor (Commercial) | X |
2629 LAN/WAN/Workstation IOP | X |
2644 34XX Magnetic Tape Attachment | X |
2663 I/O Attachment Processor | X |
2664 Integrated Fax Adapter | X |
2666 High-Speed Comm Adapter | X |
2668 AS/400 Wireless LAN Adapter | X |
2669 Shared Bus Interface Card | |
2673 Optical Bus Adapter | |
2674 Optical Bus Adapter | |
2683 266Mbps OptiConnect Receiver | |
2685 1063Mbps OptiConnect Receiver | |
2686 Optical Link Proc (266 Mbps) | |
2688 Optical Link Proc (1063 Mbps) | |
2699 Two-Line WAN IOA | X |
2723 PCI Ethernet IOA | X |
2724 PCI 14/4Mbps Token-Ring IOA | X |
2810 LAN/WAN IOA | X |
2811 PCI 25Mbps UTP ATM | X |
2812 PCI 45Mbps Coax T3/DS3 ATM | X |
2815 PCI 155Mbps UTP OC3 ATM | X |
2816 PCI 155Mbps MMF ATM | X |
2818 PCI 155Mbps SMF OC3 ATM | X |
2819 PCI 34Mbps Coax E3 ATM | X |
2838 PCI 100/10Mbps Ethernet IOA | X |
2861 32MB IOP Memory | X |
2862 128MB IOP Memory | X |
2867 256MB IOP Memory | X |
3110 64 MB Main Storage | X |
3152 32 MB Main Storage | |
3153 64 MB Main Storage | |
3154 128 MB Main Storage | |
3155 256 MB Main Storage | |
3162 128 MB Main Storage | |
3163 256 MB Main Storage | |
3164 512 MB Main Storage | |
3165 1024 MB Main Storage | |
3166 256 MB Main Storage | |
3182 32 MB Main Storage | X |
5051 Storage Exp for System Units | |
5052 Storage Exp for Expansion Unit | |
5058 Storage Expansion Unit | |
5071 266 Mbps Sys Unit Exp Tower | |
5073 1063 Mbps Sys Unit Exp Tower | |
5081 266 Mbps Storage Exp Tower | |
5083 1063 Mbps Storage Exp Tower | |
5135 Feature Power Supply | X |
5143 Feature Power Supply (400W) | |
5145 Additional Battery Backup (Int) | |
5149 Redundant Power for Model 50S | |
6050 Twinaxial Workstation Controller| |
6141 ASCII Workstation Controller | X |
6146 Diskette Adapter | X |
6147 Diskette Adapter | |
6149 16/4Mbps Token-Ring IOA | X |
6180 Twinaxial Workstation IOA | X |
6181 Ethernet/IEEE 802.3 IOA | X |
6335 840 MB QIC Mini Tape Unit | X |
6380 2.5 GB 1/4-Inch Cartridge Tape | X |
6385 13 GB 1/4-Inch Cartridge Tape | |
6390 7 GB 8mm Cartridge Tape Unit | X |
6501 Tape/Disk Device Controller | X |
6509 Additional 16 MB FSIOP Memory | X |
6512 Disk Unit Controller for RAID | |
6513 Internal Tape Device Controller | |
6516 16 MB One-Port FSIOP | X |
6517 32 MB One-Port FSIOP | X |
6518 48 MB One-Port FSIOP | X |
6519 64 MB One-Port FSIOP | X |
6520 Upgrade 1-Port FSIOP to 2-Port | X |
6522 Disk Unit Controller for RAID | X |
6523 Storage Device Controller | X |
6526 16 MB Two-Port FSIOP | X |
6527 32 MB Two-Port FSIOP | X |
6528 48 MB Two-Port FSIOP | X |
6529 64 MB Two-Port FSIOP | X |
6530 Storage Device Controller | |
6532 RAID Disk Unit Controller | |
6533 RAID Disk Unit Controller | |
6534 Magnetic Media Controller | X |
6606 Additional 1.96 GB Disk Unit | X |
6607 Additional 4.19 GB Disk Unit | X |
6616 Integrated PC Server | X |
6617 Integrated PC Server | X |
6618 Integrated Netfinity Server | X |
6713 8.58GB Disk Unit | |
6714 17.54GB Disk Unit | |
6906 1.96GB Disk Unit | |
6907 4.19GB Disk Unit | |
7000 Panel Keylock | X |
7117 Integrated Package Exp Unit | X |
7263 Opt Base 256MB Main Storage | |
7264 Opt Base 512MB Main Storage | |
7265 Opt Base 1024MB Main Storage | |
7266 Opt Base 256MB Main Storage | |
7607 Optional Base 4.19GB Disk Unit/A| X |
7713 Opt Base 8.58GB Disk Unit | |
8052 Optional Base Storage Exp Unit | |
8162 Optional MFIOP w/Twinaxial WSC | |
8210 Optional 64 MB Main Storage | X |
8253 Optional Base 64 MB MS | |
8254 Optional Base 128 MB MS | |
8255 Optional Base 256 MB MS | |
8609 EIA 232/V.24 Two-Line Adapter | X |
8664 Opt Base FDDI Adapter | X |
8716 Opt 16 MB One-Port FSIOP | X |
8717 Opt 32 MB One-Port FSIOP | X |
8718 Opt 48 MB One-Port FSIOP | X |
8719 Opt 64 MB One-Port FSIOP | X |
8726 Opt 16 MB Two-Port FSIOP | X |
8727 Opt 32 MB Two-Port FSIOP | X |
8728 Opt 48 MB Two-Port FSIOP | X |
8729 Opt 64 MB Two-Port FSIOP | X |
Features Supported by Migration Only
off
Feature | Model|
Code Description | 40S |
----- --------------------------------|------|
0031 Low-Speed Modem | X |
2156 Model 53S 4-Way Processor | |
2654 EIA 232/V.24 Two-Line 20E | X |
2655 EIA 232/V.24 Two-Line 20 | X |
2656 X.21 Two-Line 20 | X |
2657 EIA 232/V.24 Two-Line 50E | X |
2658 EIA 232/V.24 Two-Line 50 | X |
2659 X.21 Two-Line 50 | X |
2665 Shield T-P Dist Data Intf Adap | X |
3172 32 MB Main Storage | X |
4172 32 MB Main Storage | X |
4605 Additional 1.03 GB Disk Unit | X |
4606 Additional 1.96 GB Disk Unit | X |
4607 Additional 4.19 GB Disk Unit | |
4650 Additional Disk Unit (1.96 GB) | |
4652 Additional Disk Unit (1.03 GB) | X |
5060 Bus Ext Tower (Ced 1/2/Cable) | |
5061 Storage Expansion Tower | |
5062 Sys Unit Exp Twr (optical) | |
5063 Sys Unit Exp Twr (copper) | |
5070 266Mbps Sys Unit Expan Tower | |
5071 266Mbps Sys Unit Exp Tower | |
5072 1063Mbps Sys Unit Expan Tower | |
5080 266Mbps Sys Unit Expan Tower | |
5081 266Mbps Sys Unit Exp Tower | |
5082 1063Mbps Storage Exp Tower | |
5144 Additional Battery Backup (Ext) | |
6054 Workstation Adapt (LocalTalk) | X |
6109 Additional 988 MB Disk Unit | X |
6153 V.35 One-Line 20 | X |
6173 V.35 One-Line 50 | X |
6502 Disk Unit Controller for RAID | X |
6530 Storage Device Controller | X |
6602 Single Disk Unit (1.03 GB) | X |
6603 Single Disk Unit (1.96 GB) | X |
6605 Single Disk Unit/A (1.03 GB) | X |
6650 Additional Disk Unit (1.96 GB) | |
6652 Additional Disk Unit (1.03 GB) | X |
8054 Workstation Adapter (LocalTalk) | X |
8172 32 MB Base Main Storage Replace | X |
8606 Optional Base 1.96GB Disk Unit/A| X |
8665 Opt Base SDDI Adapter | X |
8863 EIA 232/V.24 Two-Line 20E | X |
8866 EIA 232/V.24 Two-Line 50E | X |
AS/400 Advanced Server - Model 40S Summary
off
Processor Feature #2109 #2110 #2111 #2112
----- ----- ----- -----
Performance - CPW Values
Client/Server Environment 27.0 35.0 63.0 91.0
Interactive Environment 9.4 14.5 21.6 32.2
Main Storage (MB)
Minimum 32 32 64 64
Maximum 224 224 512 512
DASD Capacity
Base (GB) 1.96 1.96 1.96 1.96
Maximum (GB) 50.3 50.3 50.3 50.3
Communication Lines 1-20 1-20 1-20 1-20
LAN Ports 1-3 1-3 1-3 1-3
Twinaxial Controllers 0-1 0-1 0-1 0-1
Maximum Twinaxial Workstations 7 7 7 7
ASCII Controllers 0-1 0-1 0-1 0-1
Maximum ASCII Workstations 6 6 6 6
Workstation Adapters
(for LocalTalk) 0-1 0-1 0-1 0-1
Maximum LocalTalk Workstations 31 31 31 31
Maximum Controllers (Twinaxial,
ASCII and Workstation Adapter) 3 3 3 3
1/4-Inch/8mm Cartridge Tape 0-4 0-4 0-4 0-4
1/2-Inch Tape
2440 - - - -
9348 0-4 0-4 0-4 0-4
3XXX 0-2 0-2 0-2 0-2
8mm Cartridge Tape (External) 0-4 0-4 0-4 0-4
Diskette (8 or 5 1/4-Inch) 0-2 0-2 0-2 0-2
Optical Libraries 0-4 0-4 0-4 0-4
Fax IOPs 0-5 0-5 0-5 0-5
Notes:
·
Relative system performance measurements (CPW values)
are based on AS/400 environment, commercial processing workload (CPW), and for
the AS/400 Advanced Servers are estimated for both a client/server environment
of non-interactive or batch transactions, and interactive transactions. The CPW
workload is representative of commercial applications, particularly those that
do significant database processing in conjunction with journaling and
commitment control. The CPW workload is measured on maximum configurations
using the latest release of OS/400. CPW values may not be realized in all environments.
Not available.
Planning Information
Customer Responsibilities
The 9402 Model 40S initial installation is
customer set-up. Model upgrades and feature installations for the 9402 will be
performed by IBM service representatives.
The customer is responsible for installation
of external cables and associated displays and printers. Customers who request
IBM service personnel to perform these activities are subject to a charge.
Customer responsibilities include:
V3R6 Storage Requirements
OS/400 Version 3 Release 6 and other V3R6
related components use more disk space and main storage than previous releases.
Contact your IBM marketing representative or business partners for assistance
in determining disk and memory requirements.
AS/400 Advanced Server (Model 40S) Power
Backup Requirements
For protection in the event of power outages,
customers should consider providing an Uninterruptible Power System (UPS) for
their AS/400 Advanced Server (model 40S). Systems with 96 MB or less of main
storage will require up to 5 minutes to save the contents of main storage on
disk. This will allow system recovery when power is restored. Systems with more
than 96 MB of main storage or with an Integrated Expansion Unit (#7117), will
require up to 40 minutes of backup power for a controlled shutdown if main
power is lost for an extended period of time. Consult your IBM marketing
representative or business partner for more information.
Device Support
Racks
The following 9309 Rack configurations are
supported on the AS/400 Advanced System Models 400 and 40S:
·
9309 #9171 - General Purpose I/O Rack with SPCN
Rack power control must be performed manually.
A jumper is required to control these racks manually. The jumper P/N is 93X0167
(some documentation calls out 31F7631).
Tape Units
2440-A12 - 1/2 Inch Reel-to-Reel Tape
Subsystem (not supported on the Model 40S) (withdrawn from marketing)
3422 Magnetic Tape Subsystem (withdrawn
from marketing)
The 3422 is a 1/2-inch reel-to-reel
intermediate performance tape subsystem. The 3422 reads or writes data at 6,250
bpi at a nominal data rate of 780 KB per second or 1,600 bpi at a nominal data
rate of 200 KB per second. It is a start/stop drive and is provided for
alternate IPL, program distribution, and 1/2-inch reel tape interchange.
The 3422 consists of a Model A01 with a tape
controller and one tape drive and a Model B01 with one tape drive and no
controller. A maximum of three B01s can be attached to a Model A01 for a total
of four drives per string. The 3422 attaches via the 3490 Magnetic Tape
Subsystem Attachment (#2644).
The 3422 Tape drive supports 1.5 mil thick
tape media up to a maximum of 2400 feet. Maximum: See the AS/400 model summary
table.
3430 Magnetic Tape Subsystem (withdrawn
from marketing)
The 3430 is a 1/2-inch reel-to-reel medium
performance tape subsystem. The 3430 reads or writes data at 6,250 bpi at a
nominal data rate of 312KB per second or 1,600 bpi at a nominal data rate of
80KB per second. It is a start/stop drive and is provided for alternate IPL,
program distribution, and 1/2-inch reel tape interchange.
The 3430 consists of a Model A01 with a tape
controller and one tape drive and a Model B01 with one tape drive and no
controller. A maximum of three B01s can be attached to a Model A01 for a total
of four drives per string. The 3430 attaches via the 3490 Magnetic Tape
Subsystem Attachment (#2644).
The 3430 Tape drive supports 1.5 mil thick
tape media up to a maximum of 2400 feet. Maximum: See the AS/400 model summary
table.
3480 Magnetic Tape Subsystem (withdrawn
from marketing)
The 3480 is a 1/2-inch cartridge high
performance tape subsystem with a capacity of up to 200 MB per Cartridge System
Tape. The 3480 reads and writes at an instantaneous data rate of 3 MB per
second. It is provided for program distribution, alternate IPL, save/restore,
and 1/2-inch cartridge tape interchange. The Improved Data Recording Capability
(IDRC) feature can increase the amount of data that can be stored on a cartridge
by up to three times, depending on the data. The 3480 Magnetic Tape Subsystem
provides concurrent operations when attached to more than one host system.
One 3480 A11 control unit and up to eight B11
tape drives or one A22 control unit and up to eight B22 tape drives attach via
the 3490 Magnetic Tape Subsystem Attachment/HP (#2644). Maximum: See the AS/400
model summary table.
3490/3490E Magnetic Tape Subsystem Models
AXX-DXX
The 3490/3490E is a high performance 1/2-inch
cartridge tape subsystem with a range of models that read and write at an
instantaneous data rate of up to 3 MB per second when attached with feature
#2644. The 3490 models use the Cartridge System Tape media, providing up to 200
MB per cartridge. The 3490E models use either the Cartridge System Tape media
with up to 400 MB per cartridge or the Enhanced Capacity Cartridge System Tape
media with up to 800 MB per cartridge. The models are differentiated as
follows:
The 3490 and 3490E models are provided for
program distribution, alternate IPL, save/restore, and 1/2-inch cartridge tape
interchange. The 3490 Magnetic Tape Subsystem provides concurrent operations
when attached to more than one host system.
The 3490 and 3490E models are floor standing
units except the 3490E C10, C11, and C22 which are functionally equivalent to
the 3490E D41 and D42 but mount into a system rack. The C models must be
installed in one of the following rack enclosures:
(For IBM US, No Longer Available as of March 31,
1999)
3490E feature #5037, Parallel Channel
Attachment, is a prerequisite on Models C10, C11, and C22 for attachment to the
AS400 Advanced Systems.
The Automatic Cartridge Loader (ACL) feature
accepts six 1/2-inch tape cartridges, five in the ACL and one in the drive. It
is standard on the BXX, C11 and C22 models, a feature on the DXX models and not
supported on the C10.
The Improved Data Recording Capability (IDRC)
can increase the amount of data that can be stored on a cartridge by up to
three times, depending on the data. It is standard on the 3490E models and a
feature on the 3490 models.
Maximum unattended save capacities per drive
are as follows:
This results in up to 28.8 GB unattended save
capacity on a 3490E Model C22.
Following are the 3490 and 3490E Control Unit
Models which attach to the above features:
The following models can attach to the 3490
A01 or A02 Control Unit Models:
The following models can attach to the 3490E
A10 or A20 Control Unit Models:
The 3490 Magnetic Tape Subsystems can be
shared between AS/400 systems, System/370 and System/390 as follows:
3490E
Magnetic Tape Subsystem Models E01 and E11 (withdrawn from marketing)
The 3490E E01 and E11 models are media
compatible with the current 3490E models, but offer a lower cost, smaller size,
increased performance, and increased Cartridge Stack Loader (CSL) capacity. The
new models include rack-mount and table-top versions, both with a seven
cartridge CSL. Each model has an integrated control unit and one tape drive.
Data compaction with Improved Data Recording Capability (IDRC) provides up to
three times compaction. With IDRC, data transfer rates up to 4.9 MB/sec are
obtained. Unattended save capacity up to 16.8 GB is provided. One or two 3490E
E models are supported using #6501.
The 3490E EXX models cannot be shared between
two systems, and distance from the system is limited to 82 ft (25 meters). The
3490E CXX models should be selected when system sharing is required, and/or
distance up to 400 ft (121 meters) is required. Also, the 3490E EXX models
cannot be migrated to the 3494 Tape Library Dataserver Model L10, while the
3490E CXX models can.
Maximum: See AS/400 Model Summary tables.
3490E Tape Drive Models F00, F01, F11, and
F1A
Model F00 is a single drive. Model F01 is
floor-standing and the F11 is rack-mounted, both with a standard 10 cartridge
autoloader. Model F1A is used in a 3494 Tape Library Dataserver. Each model
reads and writes 36-track tape cartridges, and reads 18-track 1/2-inch tape
cartridges. Native performance is 3MB/s. IDRC data compaction is provided.
OS/400 V3R1, or later, is required. With OS/400 V4R2, F-mode is supported
providing the following new functions:
F-mode is not supported for the 3490E-F1A in a
3494 Tape Library Dataserver. F-mode is supported back to OS/400 V3R1 (PTFs are
required prior to V4R1). Random mode is not supported on V3R6.
The 3490E-FXX models attach to the following
AS/400 features:
Maximums: See AS/400 Model Summary tables.
Magstar 3494 Tape Library
The Magstar 3494 Tape Library Model L10 is
stand-alone, automated tape-storage subsystem designed to provide unattended
tape operation.
The 3494 Tape Library Dataserver Model L12
offers the high reliability and high availability features of the Model L10
with the added support of the 3590 High Performance Tape Subsystem Model B1A.
This allows customers to automate tape data handling with the latest technology.
The ability to support the 3490E and 3590 technology in the same library offers
customers a fast and convenient way to manage these tape media.
Using Backup Recovery and Media Services/400
(5763-BR1) Version 3 Release 1 or later, the 3494 provides automated system
backup and recovery. Use of this product along with an IBM Services Offering is
optional, but recommended.
3494 Highlights:
The 3490E-CXA, F1A, and 3590-B1A tape drives
within the library attach to the AS/400 in the same way as the 3490E-CXX, FXX,
and 3490 B1A tape drives.
On the AS/400, one EIA 232/V.24 Line Adapter
or a LAN attachment is required for each 3494 Tape Library. F-mode is not
supported for the 3490E-F1A in a 3494 Tape Library
Maximums: See AS/400 Model Summary tables.
Magstar MP Tape Subsystem
The Magstar MP Tape Subsystem is an automated
tape subsystem for the AS/400 providing high levels of reliability, with lower
price, capacity and performance than the 3590. Device native data rate is
2.2MB/sec, and up to 6.6MB/sec with compaction. Native capacity is 5GB per
cartridge, and up to 15GB per cartridge with compaction. The Magstar MP tape
cartridge is a new, unique design.
The Magstar MP Tape Subsystem is available in
five models. The B00 is a stand-alone drive. The B01 and B11 are automated
models with a single tape drives, supporting random access to two removable
magazines, each supporting ten tape cartridges, with a total capacity of up to
300GB with compaction. The B01 is stand-alone, and the B11 is a rack mounted.
The B02 and the B12 are also automated models,
supporting two tape drives and a total capacity up to 300GB with compaction.
The B02 is stand-alone, and the B12 is a rack mounted. Models B02 and B12
support two modes of operation: Base Mode and Split Mode. In Base Mode, both
drives are attached to a single host with access to 20 tapes for a maximum
capacity of 300GB compacted. When configured in Split Mode, the 3570 subsystem
is effectively split into two separate 10-cartridge libraries. In Split Mode,
the 3570 attaches to two hosts, with each host accessing one drive and 10 tape
cartridges for a maximum capacity of 150GB with compaction. This mode provides
an effective solution for high-capacity, unattended backup, and does not
require switches or recabling.
The Magstar MP Tape Subsystem attaches to
AS/400 systems via the Tape/Disk Device Controller (#6501). Alternate IPL is
supported. IBM software distribution will NOT be provided on Magstar MP media.
Backup Recovery and Media Services/400
(BRMS/400) is recommended to support automation in tape handling, media
management, and automatic migration of data between tape and DASD based on user
defined policies. For those developing unique applications, OS/400 provides a
command interface.
3590 High Performance Tape Subsystem
The 3590 is a new automated tape subsystem for
the AS/400, reaching higher levels of reliability, capacity and performance.
The drive rate of 9 MB per second is three times faster than previous IBM 3480,
3490 or 3490E tape drives, allowing tape applications to read and write data
more quickly. Using the built-in data compression capability, the 3590 has a
potential maximum throughput of 20 MB per second. Actual throughput is a
function of end-to-end system capabilities including processor, DASD, bus, IOP,
OS/400 blocking and data compaction.
The 3590 uses new read/write and media
technology for vastly increased capacity and reliability. The new cartridge has
an uncompacted data capacity of 10 GB, or typically over 30 GB assuming a 3:1
compaction ratio. The capacity of an individual drive has further been
increased by the addition of the Automatic Cartridge Facility (ACF), which
allows an operator to mount ten cartridges at a time via a magazine. Thus an
individual drive can provide storage for 100 to 300 GB of data. Exploitation of
the capacity is a function of data characteristics. The 3590 cannot read or
write 3490E tape cartridges.
The 3590 is available in two models. The Model
B11 is rack mounted and includes a 10-cartridge Automatic Cartridge Facility
(ACF) that can be used in random access mode as a mini-library. The Model B1A
does not include the ACF and is designed to fit into the 3494 Tape Library
Dataserver, increasing total library capacity to over 90 terabytes.
The 3590 attaches to all DXX and later models
of the AS/400, except the X02 and P03 models, using AS/400 Feature #6501
(Magnetic Media Subsystem Controller). Each feature #6501 can support up to two
tape drives. The 3490 has two SCSI ports and can be shared between two systems.
Backup Recovery and Media Services/400
(BRMS/400) is recommended to support automation in tape handling, media
management, fast search, and automatic migration of data between tape and DASD
based on user defined policies. For developing unique applications, OS/400
provides a command interface.
7208 8mm External Tape Drives
The 7208 is an 8mm helical scan, medium
performance, high capacity, streaming tape drive with models supporting media
capacity of up to 20.0GB per cartridge. The Model 2 (Withdrawn from marketing)
provides 2.3GB capacity. When hardware data compression (HDC) on the IOP is
enabled, it typically provides 1.4 times improvement in capacity and transfer
rate. The 7208 Model 12 provides 5GB capacity, the Model 222 provides 7GB and
the model 342 provides 20GB. Models 012, 222, and 342 support an implementation
of IBM's Improved Data Recording Capability (IDRC) that typically provides a
two times improvement in capacity and transfer rate.
All 7208 models are stand-alone, table-top
devices, and can be used for save/restore, alternate IPL, program interchange
and 8mm cartridge tape interchange with other AS/400 systems. Kits for
rack-mounting are available via RPQ 841997 for the Model 2 and RPQ 841998 for
the Model 12. The 7208 attaches to the AS/400 with the following features:
Full interchange of data is supported between
Models 002, 012, 222, 342, and the 9427 and the internal 7GB 8mm tape units
using the proper tape media and recording format.
The Model 2 has an instantaneous data transfer
rate of 245KBps second. When HDC is enabled the unattended save rate would
typically be 1GB/Hr with 3.5GB of data stored per cartridge. The Model 12 has
an instantaneous data transfer rate of 500KBps. When IDRC is enabled the
unattended save rate would typically be 3GB/Hr with 10GB of data stored per
cartridge. The Model 222 has a sustained data transfer rate of 500KBps. Using
IDRC, maximum effective data transfer rate is up to 1MBps, and capacity is up
to 14GB of data stored per cartridge, depending on the type of data. The Model
342 has a sustained data transfer rate of 3MBps. Using IDRC, maximum effective
data transfer rate is up to 4.3MBps, and capacity is up to 40GB of data stored
per cartridge, depending on the type of data.
Model 222 requires the support of OS/400
Version 3 Release 1. Model 342 requires support of OS/400 Version 4 Release 1.
Maximums: See the AS/400 model summary table.
9348 Magnetic Tape Units
The 9348 is a streaming 1/2-inch reel-to-reel
tape drive that provides save/restore, alternate IPL, program distribution and
1/2-inch reel tape interchange. The 9348 offers dual density of 1,600/6250 bpi
with an instantaneous data rate of 200KB per second at 1,600 bpi and 781KB per
second at 6,250 bpi. The 9348 tape drive supports 1.5 mil thick tape media up
to a maximum of 2400 feet.
Two 9348 Magnetic Tape Units can attach to a
Removable Media Device Attachment Feature (#2621) on AS/400 Advanced Systems.
The Model 1 is rack mounted and the Model 2 is a free-standing, table-top unit.
The 9348 Magnetic Tape Units include an
attachment cable and terminator. Specify cable length as follows:
Maximums: See the AS/400 model summary table.
9427 8mm Tape Cartridge Library Models 210
and 211
The 9427 Models 210 and 211 are automated tape
libraries supported on all AS/400 D, E, and F models (except Models D02 and
E02), and on all AS/400 Advanced Series models. The 9427-210 is a stand-alone
unit, and the 9427-211 is rack-mount unit that requires 14 EIA units and 1/2 of
the horizontal rack space. Two Model 211 units can be placed in a rack,
side-by-side. Each 9427 supports one or two 7 GB 8mm tape drives. Up to twenty
tape cartridges are supported. Optional features to support dual host channels,
tape mirroring for fault tolerance, off-line host independent functions (tape
copy and compare), and a label printer port will be available. Device performance
is 1.5 MB/sec. The 9427 is available in black or white.
Tape cartridge capacity is 7 GB and sustained
data transfer rate is 500 KBps. Using Improved Data Recording Capability
(IDRC), maximum tape cartridge capacity is up to 14 GB, and effective data transfer
rate is up to 1 MBps, depending on the type of data. Total 9427 capacity is up
to 280 GB.
The 9427 can be used for save/restore,
alternate IPL (except on Models D04, D06, D10 and D20), program distribution,
migration, data interchange, automatic migration of data between DASD and tape,
and mass storage for data archive. Full interchange of data is supported with
the 7208-002, 7208-012 and 7208-232 tape drives, and the AS/400 Advanced Series
internal 7 GB 8mm tape units, using the proper tape density and 7208-002/012
tape media.
Media is handled in two, ten-cartridge
magazines, which can easily be added to or removed from the tape library. Each
library has a bar-code reader used to inventory the library contents, and a
display on the front panel that is used for status and error codes. Keys
located next to the display are used for selecting operating options. The 9427
has a front door of clear plastic so that the robotics, drives and cartridge
tapes can be seen while in operation. The door has a key-lock for security.
Neither the 7 GB 8mm Cartridge Tape unit
located in the AS/400 system unit, nor the 7208-222, can be migrated to a 9427.
The 9427 is attached to the AS/400 via the
Removable Media Device Attachment (#2621), with a maximum of one 9427 per
#2621. The Removable Media Device Attachment (#2621) has two SCSI ports. The
9427 can attach to the #2621 using one or two ports (two ports are required for
maximum performance of the 9427). If the 9427 is attached using only one SCSI
port, then the other SCSI port can be used to attach other devices. A feature
is available to support attachment to two systems with random access to
cartridges, tape mirroring, offline tape copy and compare, and a label printer
port.
Backup, Recovery, and Media Services/400
(5763-BR1) is recommended to support automation in tape handling, media
management, and automatic migration of data between tape and DASD based on user
defined policies. For those developing unique library applications, OS/400
provides a library command interface.
Optical Devices
3995 Optical Library Dataserver
The 3995 Optical Library Dataserver Models
C40, C42, C44, C46 and C48, with direct attach capability, add a new level of
price, capacity and performance to the existing storage hierarchy of magnetic
disk, optical, and tape. The new models support 52GB, 135GB, 278GB, 405GB or
670GB of storage using the industry-standard 2.6GB multifunction optical drive.
Model C44 can be upgraded to a Model C46.
The 3995 attaches to the AS/400 with the
following features:
3995-A4X, 04X and 14X models are not supported
on features #2729 and #6534.
LAN-attached Models C20, C22, C24, C26, and
C28 support 52GB, 135GB, 278GB, 405GB, and 670GB of storage using the 2.6GB
multifunction optical drive.
The 2.6GB drive has two-times the capacity of
existing drives and supports both rewritable and WORM optical disks. This new
drive also improves data transfer rate and reliability over the existing 1.3GB
optical drives.
These new 3995 models are ideally suited for
enabling applications to bring data currently stored on paper, microfiche, or
microfilm on-line. You can also use the 3995 as a low-cost complement to
high-performance magnetic disk to extend the online life of your data. The new
libraries will automate optical disk handling using the latest technology with
improvements in disk exchange time and reliability. The following OS/400
support is required:
·
For direct attached models (C40/C42/C44/C46/C48)
o
OS/400 V3R2 with PRPQ 5799-XBW S/C 3520, and 5755-AS3
with feature #1979
o
OS/400 V3R6 with OS/400 PTF SF99087 is required (this
supported was previously provided under 5755-AS4 features #1980 and #1986)
o
OS/400 V3R7 and later releases
Diskette Devices
9331 Diskette Unit Models 11 and 12
The 9331 Model 11 is an eight-inch diskette
drive packaged in a stand- alone unit. The eight-inch diskette unit allows the
customer to migrate and exchange data with existing eight-inch diskette based
systems and data entry devices such as System/36 Models 5360, 5362, System/38
Model 5382 System Units, and AS/400.
The 9331 Model 12 is a 5 1/4-inch diskette
drive, also packaged in a stand-alone unit. The 5-1/4-inch diskette drive is
used for data interchange with 5 1/4-inch based System/36 Model 5363 or 5364
and AS/400.
Remote Workstation Controllers
5251 Model 12
The 5251 Model 12 may be used to attach remote
workstations. It is a workstation controller and communications unit for remote
attachment of multiple display stations and printers. PC Support access by
Personal Computers and Personal System/2s attached to the 5251 Model 12 will
not be supported.
Note: Remote workstation controllers attach to the AS/400 via the
communications subsystem features. The 5294 or the 5394 running in 5294
emulation mode, will not give IBM Personal Computers or Personal System/2s
access to IBM PC Support/400.
5294
The 5294 Remote Control Unit can be used to
attach up to eight 5250 type displays, printers, IBM Personal Computers and
Personal System/2s, and Personal System/55 (AP only), to an AS/400 via a communications
link. The function provided will be equivalent to that available on the
System/36 and System/38 with the exception that PC Support access by Personal
Computers and Personal System/2s attached to the 5294 will not be supported.
5394
The 5394 Remote Control Unit attaches up to
sixteen 5250 type displays, printers, IBM Personal Computers and Personal
System/2s, and Personal System/55 (AP only) to an AS/400 via a communications
link. The function provided will be similar to that provided to the local
workstations via the #6140 or #6040 local twinaxial workstation controllers.
5494 Remote Control Unit
The 5494 Remote Control Unit manages the
operation of workstations and workstation communications to the AS/400. The IBM
5494-EXT replaces the IBM 5494-001 and the IBM 5494-002. The 5494 now has only
one model, to which features are added customizing the 5494 for operational
needs.
The 5494-EXT supports the attachment of up to
28 twinaxial devices. With the 5494 Twinaxial Expansion Kit installed, up to 56
twinaxial devices can communicate to the AS/400 through a Type 2.1 connection.
By installing the 5494 Token-Ring Adapter, the
5494-EXT has all the functional capabilities of the withdrawn 5494-002. It can
communicate with an AS/400 system over a Token-Ring network while supporting up
to 28 twinaxial devices, or can support Token-Ring attached devices while
communicating with an AS/400 over an SDLC, X.21, or X.25 connection. In this
configuration, the 5494 supports up to 80 devices of which up to 28 could be
twinaxial attached and the rest Token-Ring attached.
The 5494 Ethernet Adapter supports IEEE 802.2
logical link control and IEEE 802.3 or DIX Version 2.0 frame format using a
10BASE2 (BNC), a 10BASE5 (15-pin D-SUB), or a 10BASE-T (RJ-45) connector. The
5494 Ethernet AUI Cable allows the attachment to an Ethernet Network using
thick coaxial (10BASE5) cabling. Ethernet support allows the 5494 to be used as
a gateway to an Ethernet LAN or attach to an AS/400 System via an Ethernet
Network.
Multiconnectors
5299 Multiconnector and TTPA Adapter
The 5299 Multiconnector and Twinaxial to
Telephone Twisted Pair Adapter (TTPA) may be used with appropriate telephone
wiring. Initial and ongoing site cabling costs may be reduced with this wiring
option.
Workstation Support
Twinaxial Displays
The following displays are supported by the
Twinaxial Workstation Controller (#6140, #6040, and #6050):
3179 - 2
3180 - 2
3196
3197
3476
3477
3486
3487
3488
3489
5251 - 011, 999
5291
5292 - 1, 2
ASCII Displays
The following ASCII displays, are supported by
the ASCII Workstation Controller (#6141 and #6041):
3101-23 - Display Terminal
3151 - ASCII Display Terminal
3153 - ASCII Display Terminal
3161 - ASCII Display Terminal
3163 - ASCII Display Terminal
3164 - Color ASCII Display Terminal
The 315X, 316X, or equivalent attached to the
ASCII Workstation Controller are supported as the AS/400 system console. See
the "ASCII Workstation Reference and Example" manual SA41-9922, for
specific configuration information.
The following non-IBM displays have been
tested and found to work with the ASCII Workstation Controller:
·
TeleVideo 910, 925, 955 (2)
Non-IBM displays are supported only in U.S.
English. A secondary keyboard mapping facility, like the 5208 Link Protocol
Converter, is not available.
The ASCII Workstation Controller supports the
following multilingual keyboards/character sets on the 316X and 3151 displays.
The character sets are based on ISO standard 8859: Spanish, UK English,
Italian, French, German, Canadian French, Belgian, Danish, Finnish, Swedish,
Norwegian, Portuguese, Swiss French, and Swiss German. Of the above
keyboard/character sets, the 3163 and 3264 do not offer ISO 8859 support of
Spanish, UK English, Italian, French, German, and Canadian French. For these
3163 and 3164 keyboard/character sets, the ASCII Workstation Controller
supports the national character set code pages that use character set ISO 646
with the addition of national characters as supported on these displays. ISO
8859 support for French German, Italian, Spanish, and UK English requires a
corresponding 3161 feature.
For the 3101-23 display, the following
keyboard/character sets are supported: Canadian French, French, German,
Italian, and United Kingdom. The ASCII code pages for each are the national
code pages as supported by the IBM 3101-23.
LAN Attached Displays
6250 X Terminal Family
The IBM 6250 X Terminal offers
high-performance, local-area network (LAN)-attached X terminals that provide a
low-cost, desk-top platform for connectivity to the AS/400* and UNIX based host
platforms (such as the RS/6000*). The 6250 X Terminal supports multiple 5250
emulation sessions to one or more AS/400s using an X Windows interface. The X
terminal can also access UNIX host applications using either the memory
efficient 6250 Window manger or the industry standard Motif** Window Manager.
Either window manager provides a superb graphics platform for applications in
the X Window environment.
The 6250 X Terminal Family includes four
models: color and monochrome Ethernet models and color and monochrome
Token-Ring models. They come with a base of 4 MB of memory, expandable to 20 MB
or 16 MB, depending on the model. The displays both have a resolution of
1024X768 and the color models support 256 colors.
The 6250 X Terminal requires one AS/400 on the
LAN to have the IBM 6250 X Terminal Program for OS/400 (PRPQ 5799-QGP)
installed. The X terminal down-loads the X window environment from the AS/400
and then can communicate with other hosts on the LAN.
The X terminals include an integrated, swivel
display, keyboard, three button mouse and license to use the 6250 program. The
X terminals have an easy to use setup menu for initial configuration and
standard LAN connectors for the most popular Ethernet or Token-Ring
connections.
IBM Personal Computer Support
The AS/400 supports the IBM Personal Computer,
Models 5150, 5160, 5162, and 5170, as described in programming announcement
letters dated February 3, 1987 and January 26, 1988.
Personal System/2 Support
The AS/400 supports the IBM Personal System/2
models and the IBM Personal Typing System. For information regarding attachment
of specific Personal System/2 models refer to the model Sales Manual
description under "List of Supported Products" for AS/400 attachment
hardware and under "IBM Software Compatibility" for supported AS/400
software.
Printer Support
Twinaxial Printers
The following printers are supported by the
Twinaxial Workstation Controller. Those which are DBCS (Double Byte Character
Set) font capable are listed in the subsequent section.
off
Laser Printers
(Includes all electrophotographic print technologies)
Device Max.
Type Model Speed Datastream Forms
------ ----- ------- ---------- --------
3112 001 12 ppm SCS,IPDS Cut
002 12 ppm SCS,IPDS Cut
003 12 ppm SCS,IPDS Cut
3116 001 16 ppm SCS,IPDS Cut
002 16 ppm SCS,IPDS Cut
003 16 ppm SCS,IPDS Cut
3130 01S 30 ppm IPDS Cut
02S 30 ppm IPDS Cut
02D 30 ppm IPDS Cut
3812 001(1) 12 ppm SCS,IPDS Cut
002(1) 12 ppm SCS,IPDS Cut
3816 01S(1) 16 ppm SCS,IPDS Cut
01D(1) 16 ppm SCS,IPDS Cut
3912 AS0 12 ppm SCS Cut
AS1 12 ppm SCS,IPDS Cut
3916 AS0 16 ppm SCS Cut
AS1 16 ppm SCS,IPDS Cut
3930 02S 30 ppm IPDS Cut
02D 30 ppm IPDS Cut
3935 001 35 ppm IPDS Cut
4028 AS1 10 ppm IPDS Cut
(1) Withdrawn from marketing
off
Impact Printers
Device Max.
Type Model Speed Datastream Forms
------ ----- ------- ---------- --------
4210 001(1) 200 cps SCS Cont
4214 002(1) 200 cps SCS Cont
4224 101 200 cps IPDS Cont
102 400 cps IPDS Cont
1C2 400 cps IPDS Cont
1E2 400 cps IPDS Cont
1E3 600 cps IPDS Cont
4230 101 375 cps SCS Cont/Cut
1S2 480 cps SCS Cont/Cut
4S3 600 cps SCS Cont/Cut
1I1 375 cps IPDS Cont/Cut
102 480 cps IPDS Cont/Cut
4I3 600 cps IPDS Cont/Cut
4234 002(1) 410 lpm SCS Cont
008(1) 410 lpm IPDS Cont
012(1) 800 lpm IPDS Cont
4245 T12(1) 1200 lpm SCS Cont
T20(1) 2000 lpm SCS Cont
4247 001 700 cps SCS Cont/Cut
4247 001 700 cps IPDS Cont/Cut
4247 002 400 cps SCS Cont/Cut
4247 002 400 cps IPDS Cont/Cut
5219 D01(1) 40 cps SCS Cont/Cut
D02(1) 60 cps SCS Cont/Cut
5224 001(1) 140 lpm SCS Cont
002(1) 240 lpm SCS Cont
5225 001(1) 280 lpm SCS Cont
002(1) 400 lpm SCS Cont
003(1) 490 lpm SCS Cont
004(1) 560 lpm SCS Cont
5256 001(1) 40 cps SCS Cont
002(1) 80 cps SCS Cont
003(1) 120 cps SCS Cont
5262 001(1) 650 lpm SCS Cont
6252 T08 800 lpm SCS Cont
T12 1200 lpm SCS Cont
6262 T12(1) 1200 lpm SCS Cont
T14(1) 1400 lpm SCS Cont
T22 2200 lpm SCS Cont
6400 004 475 lpm SCS,IPDS Cont
6400 008 800 lpm SCS,IPDS Cont
6400 012 800 lpm SCS,IPDS Cont
6408 CT0 800 lpm SCS Cont
CTA 800 lpm SCS,IPDS Cont
6412 CT0 1200 lpm SCS Cont
CTA 1200 lpm SCS,IPDS Cont
(1) Withdrawn from marketing
Key to Abbreviations
Maximum Speed
cps
characters per second
lpm
lines per minute
ppm
pages per minute
Datastream
SCS
SNA Character Set
IPDS
Intelligent Printer Data Stream
Forms
Cut
Cut-sheet forms
Cont
Continuous forms
DBCS Printers
The following printers support DBCS (Double
Byte Character Set) fonts:
Twinaxial Attached
3130 - 01S, 02S, 02D (DBCS option required)
3930 - 02S, 02D (DBCS option required)
IBM Personal Printers
The following IBM Personal Printers are
supported by the attachments indicated in the following table. Refer to
"Attaching IBM Personal Printers to IBM Systems" (S544-4209) for
attachment information. Also refer to the specific emulator product
documentation for attachment information.
off
Device Attachment
Printer Type Model Keys
------- ------ ----- -------------------
IBM Personal Series II/Plus 2380 - 1 2 3 4 5 6 7 8 12
IBM Personal Series II/Plus 2381 - 1 2 3 4 5 6 7 8 12
IBM Personal Series II/Plus 2390 - 1 2 3 4 5 6 7 8 12
IBM Personal Series II/Plus 2391 - 1 2 3 4 5 6 7 8 12
IBM 3112 Pageprinter 3912 001 12
IBM 3112 Pageprinter 3912 002 12
IBM 3112 Pageprinter 3912 003 12
IBM 3116 Page Printer 3916 001 12
IBM 3116 Page Printer 3916 002 12
IBM 3116 Page Printer 3916 003 12
IBM 3812 Pageprinter 3812 1 2 3 6 7 12
IBM 3812 Pageprinter 3812 2 2 3 6 7 12
IBM 3816 Page Printer 3816 01S 2 3
IBM 3816 Page Printer 3816 01D 2 3
IBM 3912 Pageprinter 3912 AS0 2 3 4 7 12
IBM 3912 Pageprinter 3912 AS1 2 3 4 7 12
IBM 3916 Page Printer 3916 AS0 2 3 4 7 12
IBM 3916 Page Printer 3916 AS1 2 3 4 7 12
IBM 3930 Printer 3930 03S 1 2 3 12
IBM 3930 Printer 3930 03D 1 2 3 12
IBM LaserPrinter 4019 1 1 2 3 4 5 6 7 8 12
IBM LaserPrinter E 4019 E01 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 5E 4029 10 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 6 4029 20 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 10 4029 30 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 10E 4029 40 1 2 3 4 5 6 7 8 12
IBM 4037 5E Printer 4037 - 1 2 3 4 7 10 11 12
IBM LaserPrinter 4039 10R 2 3 4 7 12
IBM LaserPrinter 4039 12R 2 3 4 7 12
IBM LaserPrinter 4039 12L 2 3 4 7 12
IBM LaserPrinter 4039 16L 2 3 4 7 12
IBM 4070 Printer 4070 - 1 2 3 4 5 6 7 8 12
IBM ExecJet 4072 - 1 2 3 4 5 6 7 8 12
IBM ExecJet II 4076 - 1 2 3 4 7 10 11 12
IBM Proprinter 4201 1 2 3 4 5 6 7 8 9 12
IBM Proprinter II 4201 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter III 4201 3 1 2 3 4 5 6 7 8 9 12
IBM Proprinter XL 4202 1 1 2 3 4 5 6 7 8 9 12
IBM Proprinter II XL 4202 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter III XL 4202 3 1 2 3 4 5 6 7 8 9 12
IBM Proprinter X24 4207 1 1 2 3 6 7 8 9 12
IBM Proprinter X24E 4207 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter XL24 4208 1 1 2 3 6 7 8 9 12
IBM Proprinter XL24E 4208 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter 24P 4212 - 2 3 4 5 6 7 8 12
IBM Personal Pageprinter 4216 10 1 2 3 4 5 6 12
IBM 4224 Printer 4224 301 1 12
IBM 4224 Printer 4224 302 1 12
IBM 4224 Printer 4224 3E3 1 12
IBM 4226 Printer 4226 302 1 2 3 4 5 6 7 12
IBM 4230 Printer 4232 4S3 1 2 3 4 5 12
IBM 4230 Printer 4232 4I3 1 2 3 4 5 12
IBM 4232 Printer 4232 302 1 2 3 4 5 12
IBM 4234 Printer 4234 9 1 12
IBM 4234 Printer 4234 13 1 12
IBM 4770 Ink Jet Printer 4770 - 12
IBM Quietwriter 5201 1 2 3 4 5 6 7 8 12
IBM Quietwriter 5201 2 2 3 4 5 6 7 8 9 12
IBM Quietwriter III 5202 - 2 3 4 5 6 7 8 9 12
IBM Quickwriter 5204 - 1 2 3 4 5 6 7 8 9 12
IBM Impactwriter 6252 AS8 1 9 12
IBM Impactwriter 6252 AS2 1 9 12
IBM 6400 Printer 6400 004 1 2 3 12
IBM 6400 Printer 6400 008 1 2 3 12
IBM 6400 Printer 6400 012 1 2 3 12
IBM 6408 Printer 6408 A00 1 2 3 12
IBM 6408 Printer 6408 CTA 1 2 3 12
IBM 6412 Printer 6412 A00 1 2 3 12
IBM 6412 Printer 6412 CTA 1 2 3 12
Attachment Keys:
1. Attachment via the AS/400 ASCII Workstation
Controller
2. Attachment via a PC or PS/2 utilizing AS/400 PC
Support Workstation Function (DOS)
3. Attachment via a PC or PS/2 utilizing IBM OS/2
Extended Edition Version 1.3, or later
4. Attachment via the 3477 InfoWindow display or
3486/3487/3488 InfoWindow II displays
5. Attachment via the 3197 Display station
6. Attachment via a PS/2 utilizing the S36/38
Workstation Emulation Program
7. Attachment via a PC or PS/2 utilizing the Enhanced
5250 Emulation Program
8. Attachment via a PC or PS/2 utilizing the Remote 5250
Emulation Program
9. Attachment via the 5208 Model 1 ASCII-5250 Link
Protocol Converter
10. Attachment via Rumba/400
11. Attachment via IBM OS/2 Communications Manager/2
12. Attachment via OS/400 Host Print Transform function
Non-IBM Personal Printers
The following Non-IBM Personal Printers are
supported by the attachments indicated in the following table. Refer to
"Attaching IBM Personal Printers to IBM Systems" (S544-4209) for
attachment information. Also refer to the specific emulator product documentation
for attachment information.
off
Attachment
Printer Keys
------- ----------
COMPAQ PageMark 15 2 12
COMPAQ PageMark 20 2 12
HP DeskJet 500 2 12
HP DeskJet 520 12
HP DeskJet 550C 2 12
HP DeskJet 560C 12
HP LaserJet Series II 2 12
HP LaserJet IID 2 12
HP LaserJet IIP 2 12
HP LaserJet III 2 12
HP LaserJet IIID 2 12
HP LaserJet IIIP 2 12
HP LaserJet IIISi 2 12
HP LaserJet 4 12
HP PaintJet 12
HP PaintJet XL 12
HP PaintJet XL300 12
Epson ActionPrinter 2250 2 12
Epson ActionPrinter 3250 2 12
Epson ActionPrinter 5000 2 12
Epson ActionPrinter 5500 2 12
Epson DFX-5000 2 12
Epson DFX-8000 2 12
Epson EPL-7000 2 12
Epson EPL-8000 2 12
Epson FX-850 2 12
Epson FX-870 2 12
Epson FX-1170 2 12
Epson LQ-510 2 12
Epson LQ-570 2 12
Epson LQ-860 2 12
Epson LQ-870 2 12
Epson LQ-1070 2 12
Epson LQ-1170 2 12
Epson LQ-2550 2 12
Epson LX-810 2 12
Epson SQ-870 2 12
Epson SQ-1170 2 12
NEC P2 Pinwriter 2 12
NEC P2200 Pinwriter 2 12
NEC P2200 XE Pinwriter 2 12
NEC P5200 Pinwriter 2 12
NEC P5300 Pinwriter 2 12
NEC P6200 Pinwriter 2 12
NEC P6300 Pinwriter 2 12
Okidata Microline 184 Turbo 2 12
Okidata Microline 320 2 12
Okidata Microline 321 2 12
Okidata Microline 390 Plus 2 12
Okidata Microline 391 Plus 2 12
Okidata Microline 393 Plus 2 12
Okidata Microline 590 2 12
Okidata Microline 591 2 12
Okidata OL400 LED Page Printer 2 12
Okidata OL800 LED Page Printer 2 12
Okidata OL810 LED Page Printer 2 12
Okidata OL820 LED Page Printer 2 12
Okidata Pacemark 3410 2 12
Panasonic KX-P1123 2 12
Panasonic KX-P1124 2 12
Panasonic KX-P1124i 2 12
Panasonic KX-P1180 2 12
Panasonic KX-P1180i 2 12
Panasonic KX-P1191 2 12
Panasonic KX-P1624 2 12
Panasonic KX-P1654 2 12
Panasonic KX-P1695 2 12
Panasonic KX-P2123 2 12
Panasonic KX-P2124 2 12
Panasonic KX-P2180 2 12
Panasonic KX-P2624 2 12
Panasonic KX-P4410 2 12
Panasonic KX-P4420 2 12
Panasonic KX-P4430 2 12
Panasonic KX-P4450i 2 12
Panasonic KX-P4451 2 12
Xerox 4215/MRP 12
Xerox 4219/MRP 12
Xerox 4220/MRP 12
Xerox 4235 Laser Printer 12
Xerox 4700 II Color Document Printer 12
Attachment Keys:
1. Attachment via the AS/400 ASCII Workstation
Controller
2. Attachment via a PC or PS/2 utilizing AS/400 PC
Support Workstation Function (DOS)
3. Attachment via a PC or PS/2 utilizing IBM OS/2
Extended Edition Version 1.3, or later
4. Attachment via the 3477 InfoWindow display or
3486/3487/3488 InfoWindow II displays
5. Attachment via the 3197 Display station
6. Attachment via a PS/2 utilizing the S36/38
Workstation Emulation Program
7. Attachment via a PC or PS/2 utilizing the Enhanced
5250 Emulation Program
8. Attachment via a PC or PS/2 utilizing the Remote 5250
Emulation Program
9. Attachment via the 5208 Model 1 ASCII-5250 Link
Protocol Converter
10. Attachment via Rumba/400
11. Attachment via IBM OS/2 Communications Manager/2
12. Attachment via OS/400 Host Print Transform function
LAN-attached ASCII Printers
IBM and non-IBM ASCII printers can be attached
directly to the AS/400 via a LAN connection using the IBM 4033 LAN connection
product. Ethernet and Token-ring connections are supported. The ASCII printers
that are supported thru this attachment method are the same printers supported
using the OS/400 Host Print Transform function. Refer to the previous charts
for a list of IBM and non-IBM ASCII printers supported with the Host Print
Transform function.
The IBM 4039 LaserPrinter can also be attached
directly to the AS/400 via a LAN network connection using the 4039 integrated
network adapter option.
LAN-attached IPDS Printers
The following AFP-capable IBM Page Printers
are supported on Token-Ring and SDLC as specified.
Device
Type Model Speed Attachment
------ ----- ----- ----------
3935 1 35PPM Token-Ring, SDLC
The following IBM Page Printers are supported
on Token-Ring (using Remote Print Manager or PSF/2 Version 1.10 or later) and
SDLC as specified:
Device
Type Model Speed Attachment
------ ----- ----- ----------
3820 1(1) 20PPM Token-Ring, SDLC
3825 1 58PPM Token-Ring
3827 1 92PPM Token-Ring
3828 1 92PPM Token-Ring
3829 1 91PPM Token-Ring
3835 1 88PPM Token-Ring
3835 2 91PPM Token-Ring
3900 1 229PPM Token-Ring
3900 DUP 300PPM Token-Ring
(1) Withdrawn from marketing
Ordering Information
The following products are required for
printer attachment using Remote Print Manager or PSF/2 Version 1.1 or later.
Hardware
1.
PS/2 or IBM PC AT
2.
3. IBM Personal System/2* Model 30-021 or Model 30-E21
4.
5. Memory 640 KB
6. Storage IBM 20 MB Fixed Disk
7. Diskette Drive One double-sided 3 1/2 inch 720 KB
8. Keyboard Enhanced Personal Computer Keyboard
9. Display Monochrome or color display (80 column)
10.
11.or
12.
13.IBM Personal Computer AT (1)
14.
15.Memory 640 KB
16.Storage IBM 20 MB Fixed Disk
17.Diskette Drive One high-density 5 1/4 inch 1.2 MB
18.Keyboard Either an Enhanced Personal Computer Keyboard
19. or a Personal Computer AT Keyboard
20.Display Monochrome or color display (80 column)
21.
22. IBM 4 Mbps Token-Ring Network Subsystem Feature or
IBM 16/4 Mbps Token-Ring Network Subsystem Feature
23. 8228 Multistation Access Unit
24. Token-Ring PC Cable (#3390 for machine 8530)
25. Token-Ring PC Network Adapter II (#9858 for machine
8530)
26. IBM S/370 Channel Emulator Card and Cable (#3200 for
machine 8530)
27. IBM S/370 Channel Terminators: Bus, P/N 2282675; Tag,
P/N 2282676
28. The IBM 3820 Printer requires the 3820 S/370
Interface Attachment (#3055)
Software
1.
DOS Version 3.3 or subsequent releases
2. IBM Personal Computer APPC/PC, Version 1.11 (Program
#75X1047), with most current PTFs applied or subsequent releases
3. Token-Ring Network PC Adapter Support Interface
(provided on the Network PC Adapter II card), or Local Area Network Support
Program V1.1 (Program #93X5683)
4. Remote PrintManager Version 2.0.3 (Program #25F5944)
Miscellaneous Devices
2480 AS/400 Wireless Access Point
These compact, lightweight devices act as
either wireless LAN bridges or wireless LAN repeaters which support transparent
roaming through a multi-cell network. Two models of the AS/400 Wireless Access
Point are supported:
·
2480 Model RS0, AS/400 Wireless RS-485 LAN Access
Point. This device is used with the AS/400 Wireless LAN Adapter to create a
multi-cell wireless network. These access points may connect to the AS/400
Wireless LAN Adapter through an RS-485 twisted-pair wired backbone or without
wire using the RF network. The 2480 Model RS0 is supported on AS/400 Advanced
Systems with an AS/400 Wireless LAN Adapter (#2668)
4754 Security Interface Unit (SIU)
The 4754 Security Interface Unit (SIU) is an
optional device that attaches to the Cryptographic Processor features #2620 or
#2628. The 4754 provides the ability to communicate with the IBM Personal
Security Card for highly secure importation of cryptographic keys into the
Cryptographic Processor. The 4754 may also be used for initialization of the
Cryptographic Processor. The 4754 SIU has tamper-resistant packaging. Three IBM
Personal Security Cards are included with each 4754. The 4754 must be ordered
separately from the Cryptographic Processor feature.
Software support for the 4754 is provided by
OS/400 and the IBM Common Cryptographic Architecture Security Services/400 PRPQ
(5799-XBY).
5159 Programmable I/O Controller
The 5159 Programmable I/O Controller is an
asynchronous communication controller that performs computer processing and
data transfer between an AS/400 and downstream asynchronous devices. These
devices include but are not limited to time clocks, scales, badge readers,
scanners, robots, bar code readers. The 5159 attaches locally to any AS/400
communication port configured for asynchronous communications. The asynchronous
devices may attach locally or remotely under the control of user programs.
Remote devices may require the use of asynchronous modems to connect to the
5159.
5259 Migration Data Link
The 5259 Migration Data Link is a stand-alone
device that offers a cabled data path between the IBM System/36 or System/38
and the IBM AS/400 system. Systems are connected through their respective
workstation controllers.
The Migration Data Link, together with
programming support provided by the IBM AS/400 System/36 Migration Aid
(5727-MG1) or the IBM AS/400 System/38 Migration Aid (5714-MG1) and the IBM
Operating System/400, provides for data send/receive functions between systems.
In addition, the Migration Data Link provides access between systems by
providing hot key availability from up to seven workstations per Migration Data
Link.
System/36 and System/38 Devices Not
Supported by the AS/400
1255 MICR
3203 Printer
3262 Printer
3370 DASD
3410/3411 Tape Units
4245 - 012, 020 (Note 1)
5211 Printer
5224-012 Printer (Japan only)
5225-011, 012 Printer (Japan only)
5251-001, 002 Display
5251-012 Display/WS Controller (AS/400 Office and PC support
only)
5252 Display
5255 Display (Japan only)
5424 MFCU
6157 Cartridge Tape Unit
62PC Disk Drive
6580 Displaywriter as a printer device
6670 Document Processor
8809 Tape Drive
Digital Data Service Adapter (DDSA)
Diskette Magazine Unit
Initial 5250 Emulation Adapter for IBM Personal Computer
(6072534)
Note 1: RPQs are available to convert models
012 and 020 to models T12 and T20 which are supported by 9402.
Model Upgrades
Upgrades to the Model 40S
off
From: To:
Model 40S
Processor 2109 2110 2111 2112
----------- ---- ---- ---- ----
9402-100 X X X
(For IBM US, No Longer Available as of March 27, 1998)
9404-135
9404-140
20S 2010 X X X
30S 2411
30S 2412
40S 2109 X X X
40S 2110 X X
40S 2111 X
40S 2112
50S 2120
50S 2121
50S 2122
53S 2154
53S 2155
Upgrade Considerations
Model upgrades allow existing AS/400 Advanced
Server systems to move to the new AS/400 Advanced Server (model 40S). Machine
type number designation and serial number will be maintained when upgrading to
the new servers. Much of your investment in hardware and software is preserved
in the move to the new, advanced design hardware.
System upgrades involve substantial change to
an installed system. Accounting and tax implications may result and should be
reviewed by a tax advisor.
Net-priced main storage feature exchanges will
be offered within COMPATIBLE features when needed to increase system main
storage capacity. When model or processor conversions result in INCOMPATIBLE
main storage features, exchanges to equal or greater capacity in megabytes of
feature main storage will be offered. Net-priced exchanges are NOT offered when
upgrading to the AS/400 Advanced Server Model 40S.
ONLY IBM-manufactured main storage memory
cards are eligible for feature exchange. Parts removed as part of a net-priced
feature exchange transaction must be returned to IBM.
All external I/O devices supported on Models
20S and 30S are also supported on AS/400 Advance Server Models 40S, 50S, 53S.
Refer to the Optional Features section for features that migrate.
The following 9402 Model 100 and 9404 Model
135 and 140 features and devices are not supported on the AS/400 Advanced
Servers:
·
Save/Restore Features/Devices:
o
3490 Magnetic Tape Subsystem Attachment (#2622)
o
Storage Device Controller (#2624) (this feature will be
migrated to support integrated tape devices only)
o
Diskette Unit (5 1/4-inch) (#6131)
o
Diskette Unit (8-inch) (#6132)
o
Diskette Unit (5 1/4-inch) (#6133) (For IBM US, No
Longer Available as of July 31, 1996)
o
Diskette Unit (5 1/4-inch) (#6137)
o
Diskette Unit (8-inch) (#6138)
o
Diskette Unit (5 1/4-inch) (#6139) (For IBM US, No
Longer Available as of July 1, 1997)
o
Expansion Unit (#7122)
Upgrades to AS/400 Advanced Servers (Model
40S)
Upgrading to an AS/400 Advanced Server with a
microprocessor based on PowerPC technology, requires advance planning by
marketing, business partners, service and customer personnel.
New services are available from IBM to help
you perform your upgrade responsibilities. Contact your IBM representative for
services available. Additional detail information is provided in:
·
AS/400 Planning for PowerPC Technology (SA41-4154)
Consider the following before you upgrade:
·
The amount of memory and DASD space required will
increase when moving to AS/400 Advanced Server (Model 40S).
Internal Tape and DASD Conversion
When migrating from a Model 100, 135, or 140,
internal tape and DASD features must be converted, for a charge, using a
feature migration kit. Refer to the Optional Feature section for features that
require a migration kit.
9309 Rack Migration
All 9309 racks migrate as 9309 racks with
feature #9141 or #9171 and can be attached directly to Model 40S for the
purpose of attaching external tape. All 9309-9141 racks and 9309-9171 racks
when attaching to a 40S Advanced Server, require installation of PN 31F7631
wrap connector for manual power control.
Data Conversion
When converting to the new systems, existing
data on the system is preserved and no save/restore is required unless data is
resident on DASD devices no longer supported. In these cases, a save/restore
can migrate the data, or new DASD can be purchased and installed on the
existing system, and then data can be transferred.
AS/400 System Installation and Upgrade
Services
Moving to AS/400 Advanced Series requires
careful planning prior to upgrading the hardware and software. Several
different approaches are available to address varying customer upgrade
requirements, and IBM fee services are available to perform part or all of the
upgrade process, including upgrading from releases prior to Version 2 Release 3.
Your IBM representative will assist you in
determining the best upgrade method for your operational environment. Contact
your local IBM service provider.
Keyboard Support
The 5250-style keyboards supported by the
System/36 and System/38 are also supported by the Twinaxial Workstation
Controller. Countries that are not listed below do not have a country-unique
keyboard that is supported by the local workstation controller. The Twinaxial
Work Station Controller will support the following keyboard IDs:
122 IBM
Typewriter Enhanced
Country/Language (1A) (G)
Arabic X/Basic 239 239
Austria/Germany 265 129 (1)
Belgium 269 120 (1)
Canadian/French 277 058 (1)
Cyrillic 241 241
Denmark 281 159 (1)
Finland/Sweden 285 153 (1)
France 251 120 (1)
Greece 218 218
Hebrew 210 113
Iceland 197 197
Italy 293 142 (1)
Japan
(Katakana/Kanji) 694R 694R
Latin America 170 171 (1)
Latin 2 114 114
Netherlands 101 143
Norway 281N 155 (1)
Portugal 301 163 (1)
Spain 172 173 (1)
Switzerland/French 714F 150F (1)
Switzerland/
German and Italian 714G 150G (1)
Thailand --- 190
Turkey 402 179
United Kingdom 313 168 (1)
United States 101 101G (1)
Yugoslavia 234 234
The 122 Typewriter Keyboard is supported on
the 3179, 3180, 3196 and 3197 Display Stations. The IBM Enhanced Keyboard is
supported on the 3179 (US only), 3196, and 3197 Display Stations.
(1) The indicated IBM Enhanced Keyboards are
emulated by the ASCII Workstation Controller.
Code Page Support
The Twinaxial and ASCII Workstation Controller
will support the following code pages and character sets:
off
Country/ EBCDIC EBCDIC ASCII
Language Code Character Code
Page Set Page (3)
Arabic X/Basic 420 235 ---
Austria/Germany 273, 500 697 819 (1), (2)
Belgium 500 697 819
Canadian/French 500, 260 697 819 (1), (2)
Chinese
Simplified 037 697 ---
Chinese
Traditional 037 697 ---
Cyrillic 880 960 ---
Denmark 277, 500 697 819
Finland/Sweden 278, 500 697 819
France 297, 500 697 819 (1), (2)
Greece 423 218 ---
Hebrew 424/2 941/2 ---
Iceland 871, 500 697 ---
International 500 697 ---
Italy 280, 500 697 819 (1), (2)
Japan English 281, 500 --- ---
Katakana/Kanji 290 --- ---
Korea 037 697 ---
Latin America 284, 500 697 819 (1)
Netherlands 037, 500 697 ---
Norway 277, 500 697 819
Portugal 037, 500 697 819
Spain 284, 500 697 819 (1)
Switzerland/
French 500 697 819
Switzerland/
German and
Italian 500 697 819
Thailand 838 938 ---
Turkey 905 965 ---
United Kingdom 285, 500 697 819 (1), (2)
United States 037, 500 697 367
Yugoslavia 870 959 ---
(1) On the 3163 and 3164 displays, the ASCII
code page is the national language code page, using character set ISO 646 with
the addition of the national language characters supported on those displays.
(2) On the 3101 display, the ASCII code page
is the national language code page, as supported by that display.
(3) Code page 819 is IBM's code page of ISO
8859, character set 00697. IBM ASCII displays supported are: 3151, 3161, 3162,
3163, 3164, and 3101-23.
The SNA*ps 5250 (1) Version 1.5 that is used
with the direct attachment of Macintosh devices to the AS/400 systems supports
the following code pages:
Country/Language Code Page
US English 037
Multinational 500
Austrian/German 273
Brazilian/Portuguese 037
Danish 277
Finish 278
French 297 (supports French AZERTY and Qwerty)
Italian 280
Netherlands 037
Norwegian 277
Portuguese 037
Spanish 284
Spanish Speaking 284
Swedish 278
English (UK) 285
Dimension Weight
Width Depth Height Est. Maximum
----- ----- ------ -------------
9402 Model 40S
System Unit 205mm 723mm 500mm 29kg
With Expansion Unit 380mm 723mm 500mm 54kg
Temperature (model 40S): 10 to 38 degrees C (50 to 100
degrees F)
Relative Humidity: 8 to 80% (1)
Wet Bulb: 23 degrees C (73.4 degrees F)
(1) All tape media used on the 9402 and 9406
have a relative humidity range of 20 to 80%.
Voltage: The Model 40S System Units can
operate at either low voltage (100-127 VAC) or high voltage (200-240 VAC). The
appropriate system power cord will automatically be added by the order
configurator based on the three-digit country code on the order. If other than
the default option is required, specify: #2960 for the 120-Volt Power Cord, or
#2961 for the 240-Volt Power Cord.
Refer to the Physical Planning Reference,
SA41-4109, for additional technical planning information.
Not available.
The minimum system configuration consists of a
system unit and a system console.
The system requires AS/400 Licensed Internal
Code. The Licensed Internal Code is pre-loaded on the system disk storage unit.
The system console may be any supported
display or IBM compatible personal computer emulating a supported display. A
Macintosh personal computer attached to the Workstation Adapter can also serve
as the system console. The system console should be located within 6 meters (20
feet) of the operator's panel, and the operator's panel must be viewable from
the display.
Although a printer is not required for
service, IBM's ability to diagnose the system and perform upgrades is greatly
enhanced when a printer is available.
Although not required for hardware service,
IBM's ability to service the system is greatly enhanced when a voice telephone
is available within view of the system. The telephone must not be connected to
phone mail or an answering machine, since the ability to receive calls on this
telephone is important in the event support personnel need to reach the IBM
representative. This telephone line is in addition to the one needed for
electronic customer support.
An IBM 7855 or equivalent modem is part of the
minimum system configuration and is required for electronic customer support.
AS/400 Advanced Server Model 40S requires the
support of OS/400 Version 3 Release 6, or later.
The following publications are shipped with
the AS/400 Advanced Server Model 40S System Units. Additional copies can be
ordered.
off
Model 40S
AS/400 Cable Attachment SA41-4137
AS/400 Safety Information SA41-4139
AS/400 Service Functions SY44-4902
9402/9404 Models 4XX Problem Analysis, Repair
and Parts, Upgrade SY44-4941
AS/400 Safety Inspection SY44-4943
(#0200) Replacing the Release: (For IBM US, No Longer Available as of May 31,
1999)
This no-charge specify code denotes the
upgrade will be done via the Replacing the Release method. This upgrade method
may be used for upgrading systems running OS/400 V2R3 through V3R1. The
Replacing the Release method is based on user objects remaining on the DASD
units throughout the upgrade process. All supported DASD units are retained in
the upgrade to the V3R6 system. Prior to upgrading the hardware, the Disk
Preparation Utility must be run to prepare the DASD units on the prior
release system for the new 4KB page size. All necessary object conversions are
done by the system as part of the upgrade. This is the preferred approach for
larger systems when all DASD units will be moved to the V3R6 system. Replacing
the release reduces potential problems caused by save/restore and tape
handling. It is the method most commonly used by AS/400 customers.
(#0201) Unload/Reload: (For IBM US, No Longer Available as of May 31,
1999)
This no-charge specify code denotes the
upgrade will be done via the Unload/Reload upgrade method. This method consists
of unloading user applications and data to tape, upgrading the hardware,
installing OS/400 V3R6, and reloading the user applications and data. This
approach is attractive for smaller systems, and reduces upgrade time compared
to replacing the release. It may also be an effective method for upgrading
common programs and files on multiple systems.
(#0203) Side-by-Side Install: (For IBM US, No Longer Available as of July 2,
2002)
This no-charge specify code is used to alert
IBM service representatives of the intention to install a new system
concurrently with an existing system, and over time, move applications to the
new system. This method may be used when adding a system to an existing complex
or network, or when a replaced system is being moved to another location.
AS/400 Roadmap for Changing to PowerPC Technology (SA41-4150) describes this
option in detail. IBM services are also available for a charge.
One of the following specify codes must be
entered on the system order to describe which tape drive will be used for the
alternate IPL device. The choice should match the type of media that was
selected for software distribution.
One of the following specify codes must be
entered on the system order to describe which tape drive will be used for the
alternate IPL device. The choice should match the type of media that was
selected for software distribution.
#5502 - Alternate IPL Specify for QIC-3040
#5504 - Alternate IPL Specify for 3490 EXX
#5507 - Alternate IPL Specify for 9348
#5508 - Alternate IPL Specify for 3422 (For IBM US, No
Longer Available as of August 31, 1998)
#5509 - Alternate IPL Specify for 3430 (For IBM US, No
Longer Available as of August 31, 1998)
#5511 - Alternate IPL Specify for 3480
#5512 - Alternate IPL Specify for 3490
#5513 - Alternate IPL Specify for 3490
#5514 - Alternate IPL Specify for 7208
#5515 - Alternate IPL Specify for 3570
#5516 - Alternate IPL Specify for QIC-1000 (For IBM US, No
Longer Available as of August 31, 1998)
#5517 - Alternate IPL Specify for QIC-2500
#5518 - Alternate IPL Specify for QIC-13000 (5XX models
only)
#5519 - Alternate IPL Specify for 3590
·
#0040 Mirrored System - Disk Unit Level Protection
When added to an initial order, this specify code
will cause the order to fail if sufficient DASD is not ordered to support
device level mirrored protection. On upgrade orders, a warning message will be
generated during installation of the upgrade if sufficient DASD is not
available to support device level protection across the system.
When added to an initial order, this specify code
will cause the order to fail if non-RAID DASD is ordered. On upgrade orders, a
warning message will be generated during installation if a RAID capable DASD
without RAID enabled is encountered.
If one of the following tape devices is owned
by the customer the appropriate tape migration codes must be added to the
records. These codes are not required when placing a new order for the tape
device except for those marked with an asterisk.
Note: Some of these features may no longer be available. Always check
announcement letters to ensure if specific features listed here are available.
·
Standalone or Remotely Attached Tape Devices (reserves
an IOP slot)
o
#0019 3995 Optical Library Attch (support only)
o
#0021 7208-xxx Lcl Src Stnd Alon *
o
#0023 3490-E01 Lcl Src Stnd Alon
o
#0024 9348-002 Lcl Src Stnd Alon
o
#0026 3490-CxA Lcl Src Libry Mnt *
o
#0027 3490-Cxx Shared
o
#0035 9427-210 Lcl Src Stnd Alon
o
#0038 3590-B11/B1A Shared
o
#0052 3590-B1A Lcl Src Libry Mnt
o
#0066 3490-Cxx SCSI Remote Attch
o
#0067 3490-Cxx SCSI Library Mnt
o
#0082 3570-X0X Field Merge Stnd Alon
o
#0095 Lcl Src Tape w/SPD Ctlr
(#2960) 120 Volt, 15 Amp, 6 Foot Line
Cord: #2960 specifies
that all line cords for the ordered system be 6 feet long, 15 Amp and 120V.
#2960 applies to the line cord for the system unit and attached expansion units
(#5070, #5072, #5080 and #5082). #2961 is not allowed on the same order as #2960.
Maximum: One Specify codes #9080, #9082 and #9083 can be used in addition to
#2960 to specify other attributes of the line cord such as length and plug
type.
(#2961) 240 Volt, 10 Amp, 6 Foot Line
Cord: #2961 specifies
that all line cords for the ordered system be 6 feet long, 10 Amp and 240V.
#2961 applies to the line cord for the system unit and attached expansion units
(#5070, #5072, #5080 and #5082). #2960 is not allowed on the same order as #2961.
Maximum: One. Specify codes #9080, #9082 and #9083 can be used in addition to
#2961 to specify other attributes of the line cord such as length and plug
type.
All system orders require a language specify
code. A language specify code is required on all model upgrade orders
regardless if one is already on the install record. Some codes may have country
specific usage.
off
2902 Estonian
2903 Lithuanian
2904 Latvian
2905 Vietnamese
2906 Lao
2909 Belgian English
2911 Slovenian
2912 Croatian
2913 Macedonian
2914 Serbian
2915 Polish
2916 Russian
2917 English U/L DBCS
2918 Slovakian
2919 Portuguese MNCS
2920 Farsi
2924 English
2928 French
2929 German
2930 Japanese Kanji
2931 Spanish
2932 Italian
2935 French Canadian
2938 English U/C DBCS
2939 German MNCS
2940 French MNCS
2941 Arabic
2942 Italian MNCS
2944 Icelandic
2950 English U/C SBCS
2956 Turkish
2957 Greek
2962 Traditional Chinese
2969 Korean
2972 Thai
2974 Bulgarian
2975 Czech
2976 Hungarian
2978 Portuguese
2979 Brazilian Portuguese
2980 UK English
2982 Finnish
2983 Norwegian
2984 Belgian French
2989 Belgian Dutch
2987 Swedish
2988 Dutch
2990 Hebrew
2992 Romanian
2993 Danish
2995 Albanian
2998 Simplified Chinese
(#0210) Memory Return Instruction
Specify: This specify
code is used to ensure that the proper RMER and CE instructions are used for
special memory returns, as applicable. If an order contains a special memory
transition offering, the configurator will ask if #0210 should be added.
When ordering an AS/400 Advanced Server, a
processor must be specified. The following processors are available:
·
Model 40S
o
#2109 Model 40S Processor (Uni-Processor) (For IBM US,
No Longer Available as of August 31, 1998)
o
#2110 Model 40S Processor (Uni-Processor)
o
#2111 Model 40S Processor (Uni-Processor)
o
#2112 Model 40S Processor (Uni-Processor)
Main storage memory cards are available both
at the time of the original system order (plant install) and after the
installation (field install). Following are the main storage features available
by model.
The following main storage features are for
the Model 40S:
(#5135) Expansion Unit Feature
Power: (For IBM US, No
Longer Available as of June 30, 2000)
This feature is required to support the third
and fourth disk units, a second internal tape unit, and/or the third CD-ROM
unit in the base Model 40S with Standard DASD Package (#9319). It is also
required to support certain high-power combinations of feature cards. It is
also required for the base Model 40S Migrated DASD Package (#9320)
(#5143) Feature Power Supply: (For IBM US, No Longer Available as of July 2,
2002)
#5143 is a 400 watt feature power supply that
is required on the #5070/#5072/#5080/#5082 Expansion Towers when one of the
conditions in the following table exists. One #5143 is allowed per tower.
off
Feature Additions that require #5143:
|------------|------------------|
| Model/ | #5051 | #5052 |
| Feature | | |
| -----------|--------|----------
| | | |
| #5070/#5072| No | Yes |
| | | |
| #5080/#5082| No | Yes |
|--------------------------------
(1) The base
CD-ROM (#9520) does not count as a tape unit.
(#7000) Panel Keylock: (For IBM US, No Longer Available as of June 30,
2000)
This feature, available on the Model 40S,
provides a keylock, allowing the door covering the system panel to be secured,
preventing access to panel functions. Maximum: One.
(#9108) Standard Expansion Gate: (For IBM US, No Longer Available as of August 31,
1998)
This base feature on the Model 40S, provides
space to mount up to two feature cards. Expansion Power #5135 may be required.
Refer to description of #5135.
(#7117) Integrated Package Expansion
Unit: (For IBM US, No
Longer Available as of June 30, 2000)
This feature, available on the Model 40S,
provides four additional feature card slots and space for adding two tape units
and up to eight disk unit features.
Two of the following internal tape units are
supported:
Up to eight of the following disk units are
supported:
A maximum of one #7117/#9117 Integrated
Package Expansion Unit is supported.
(#9108) Standard Expansion Gate: (For IBM US, No Longer Available as of August
31, 1998)
This base feature on the Model 40S provides
space to mount up to two feature cards. Expansion Power #5135 may be required.
Refer to description of #5135.
(#9116) High-Performance Card
Enabler: (For IBM US,
No Longer Available as of July 2, 2002)
This no-charge specify code for the Model 40S
will be added by the configurators when one of the high-performance feature
cards listed below is installed in the #9108 Expansion Gate. Adding this code
provides a special backplane and cabling required by features with higher power
consumption.
Maximum: One. Prerequisites: #7108/#9108
Expansion Gate. One of the listed cards must be present on the system.
(#9319) Standard DASD Package: This feature provides four positions in the base
Model 40S system unit for the following disk units:
A maximum of one #9319/9320 is supported.
(#9320) Migrated DASD Package: This feature provides four positions in the base
Model 40S system unit for the following migrated disk units:
A maximum of one #9319/9320 is supported.
(#6602) Single Disk Unit (1.03
GB): (For IBM US, No
Longer Available as of September 29, 1995)
This One-byte SCSI disk unit provides 1.03 GB
of disk capacity for the Model 40S.
(#6603) Single Disk Unit (1.96
GB): (For IBM US, No
Longer Available as of September 29, 1995)
This One-byte SCSI disk unit provides 1.96 GB
of disk capacity for the Model 40S.
(#6605) Disk Unit/A (1.03 GB): (For IBM US, No Longer Available as of January
31, 1997)
This feature provides 1.03 GB of disk capacity
for Models 40S, 50S, and 53S.
(#6606, #9606) Additional Disk Unit
(1.96 GB): (For IBM
US, No Longer Available as of March 31, 1999)
This feature provides 1.96 GB of disk capacity
for Models 40S, 50S, and 53S.
Some of the C thru F Model internal disk units
can be upgraded for use in the AS/400 Advanced Series models. These upgrade
features are parts kits which allow a customer owned disk unit to be adapted
for use on AS/400 Advanced Series. The following table shows the disk units
that can be converted and the kit required. This upgrade can only be performed
in conjunction with an upgrade from a C thru F model to an AS/400 Advanced
Series model. The C thru F model feature must be removed from the install
record.
off
Migration
Old Feature Qty Feature
Feature Kit Number Models Description
------- --------- --------- ----- ---------------------------
2800(1) 1105 5XX 2 Single Disk Unit Kit (320MB)
6102 1105 4XX 1 Single Disk Unit Kit (320MB)
(For IBM US, No Longer Available as of September 29, 1995)
9102 1105 4XX 1 Single Disk Unit Kit (320MB)
(For IBM US, No Longer Available as of September 29, 1995)
6105 1105 4XX/5XX 1 Single Disk Unit Kit (320MB)
6106 1105 4XX/5XX 2 Single Disk Unit Kit (320MB)
6108 1105 4XX/5XX 2 Single Disk Unit Kit (320MB)
9106 1105 4XX/5XX 2 Single Disk Unit Kit (320MB)
9800 1105 5XX 2 Single Disk Unit Kit (320MB)
6101 1107 4XX 1 Single Disk Unit Kit (400MB)
6103 1107 4XX 1 Single Disk Unit Kit (400MB)
(For IBM US, No Longer Available as of February 23, 1996)
9103 1107 4XX 1 Single Disk Unit Kit (400MB)
6107 1107 4XX/5XX 1 Single Disk Unit Kit (400MB)
6120 1107 4XX/5XX 2 Single Disk Unit Kit (400MB)
6121 1107 4XX/5XX 2 Single Disk Unit Kit (400MB)
9120 1107 4XX/5XX 2 Single Disk Unit Kit (400MB)
6104 1109 4XX 1 Single Disk Unit Kit (988MB)
(For IBM US, No Longer Available as of September 29, 1995)
6126 1109 4XX 1 Single Disk Unit Kit (988MB)
(For IBM US, No Longer Available as of September 29, 1995)
9104 1109 4XX 1 Single Disk Unit Kit (988MB)
(For IBM US, No Longer Available as of September 29, 1995)
6109 1109 4XX/5XX 1 Single Disk Unit Kit (988MB)
(For IBM US, No Longer Available as of September 29, 1995)
6125 1109 4XX/5XX 1 Single Disk Unit Kit (988MB)
9109 1109 4XX/5XX 1 Single Disk Unit Kit (988MB)
6123 1109 4XX/5XX 2 Single Disk Unit Kit (988MB)
6124 1109 4XX/5XX 2 Single Disk Unit Kit (988MB)
6127 1109 4XX/5XX 2 Single Disk Unit Kit (988MB)
8123 1109 4XX/5XX 2 Single Disk Unit Kit (988MB)
2801 1109 5XX 2 Single Disk Unit Kit (988MB)
9801 1109 5XX 2 Single Disk Unit Kit (988MB)
6601 1602 4XX 1 Single Disk Unit Kit (1.03GB)
6602 1602 4XX/5XX 1 Single Disk Unit Kit (1.03GB)
6701 1602 4XX 1 Single Disk Unit Kit (1.03GB)
9601 1602 4XX 1 Single Disk Unit Kit (1.03GB)
6802 1602 4XX/5XX 1 Single Disk Unit Kit (1.03GB)
9602 1602 4XX/5XX 1 Single Disk Unit Kit (1.03GB)
2802 1602 5XX 2 Single Disk Unit Kit (1.03GB)
6612 1602 4XX/5XX 2 Single Disk Unit Kit (1.03GB)
6812 1602 4XX/5XX 2 Single Disk Unit Kit (1.03GB)
8612 1602 4XX/5XX 2 Single Disk Unit Kit (1.03GB)
9802 1602 5XX 2 Single Disk Unit Kit (1.03GB)
6603 1603 4XX/5XX 1 Single Disk Unit Kit (1.96GB)
6613 1603 4XX/5XX 2 Single Disk Unit Kit (1.96GB)
7613 1603 4XX/5XX 2 Single Disk Unit Kit (1.96GB)
8613 1603 4XX/5XX 2 Single Disk Unit Kit (1.96GB)
Note (1): Feature #2800 does not appear in the
install record. However, the disk units in a #2800 can be removed and placed in
a kit.
When converting to a 4XX or 5XX model, disk
units located in the system unit must be converted or removed. The following is
a list of the conversions that are available:
A Multi-Function I/O Processor (MFIOP) is
included in the base system unit. It controls up to four internal disk units on
all models.
(#6522) Disk Unit Controller for
RAID: (For IBM US, No
Longer Available as of June 30, 2000)
Feature #6522 provides RAID-5 protection for
internal disk units installed in the Integrated Package Expansion Units (#7117)
on the Model 40S. Disk units attached with the #6522 can be mirrored or
unprotected. In the RAID-5 configuration, disk unit protection is provided with
greater performance than system checksums. The disk units supported are listed
in the Power and Packaging Features section of the system unit Sales Manual,
under the description for the #7117. Card slots used: One. Maximum: One.
Mutually exclusive with #6502/#6530/#6523. Prerequisite: Expansion Unit #7117.
(#6523) Storage Device Controller: (For IBM US, No Longer Available as of June 30,
2000)
This feature provides attachment capability
for an additional eight disk units in the Storage Expansion Unit (#7117) on the
Model 40S. Card slots used: One. Maximum: One. Mutually exclusive with
#6502/#6522/#6530. Prerequisite: Expansion Unit #7117.
The system and expansion towers accommodate
internal 1/4-inch tape, 8mm tape and CD-ROM. All devices are controlled by the
system MFIOP or the storage device controller (#2624).
Code for AS/400 release V3R6 will be
distributed on CD-ROM media. The configurator will select one CD-ROM device
(#9520) during the order process.
The configurator will verify that a tape or
migrated tape specify has been selected otherwise the order will fail with a
message explaining that without a tape device the save/restore capability of
the system is jeopardized.
In order to ensure that the system has AIPL
capability, the configurator will also validate that the system has an
alternate IPL specify code.
(#6335) 840 MB QIC Mini Tape Unit: The 840 MB QIC Mini Tape Unit is a feature for
AS/400 Advanced Series system units and expansion units. It provides a lower
priced alternative, and a convenient, smaller sized tape cartridge than the
traditional QIC devices. It can be used for save/restore, migration and data
interchange. Using the QIC-3040-MC recording format, tape cartridge capacity is
840 MB. With hardware data compression, maximum tape cartridge capacity is up
to 1.6 GB. Sustained data transfer rate is 300 KBps. Feature #6335 can be
mounted in the system unit and in expansion features #7117/#9117 (4XX models)
and #5070/#5072 (5XX models). Attachment is with the MFIOP in system units.
System expansion unit attachment is via feature #2624.
(#6380) 2.5 GB 1/4-Inch Cartridge Tape
Unit: (For IBM US, No
Longer Available as of June 30, 2000)
The 2.5 GB 1/4-Inch Cartridge Tape Unit is an
optional feature that provides read/write compatibility through all supported
AS/400 1/4-Inch Cartridge (QIC) tape formats, meeting AS/400 customer needs for
compatible QIC media interchange.
The 2.5 GB 1/4-inch Cartridge Tape Unit
supports the following media and formats:
The 2.5 GB 1/4-Inch Cartridge Tape Unit has an
effective data rate of 300K bytes per second when operating in the QIC-2GB or
QIC-1000 format, 200K bytes per second when operating in the QIC-525 format and
120K bytes per second when operating in the QIC-120 format.
Feature #6380 can be mounted in the system
unit or in expansion features #7117/#9117 (4XX models) and #5070/#5072 (5XX
models). It may be used for save/restore, alternate IPL, program distribution,
migration and 1/4-Inch Cartridge tape exchange. Hardware data compression (HDC)
is supported.
(#6390) 7GB 8mm Cartridge Tape
Unit: The 7GB 8mm
Cartridge Tape Unit is a helical scan, high capacity, streaming tape drive with
a sustained data transfer rate of 500KB per second. The tape unit includes data
compression hardware using an adaptation of IBM's IDRC algorithm which provides
an effective capacity of up to 14GB per cartridge and an effective transfer
rate of 1MB per second, depending on the type of data transferred. Error
Correction Code (ECC) is used to maintain data integrity.
The 7GB 8mm Cartridge Tape Unit uses the same
media and cleaning cartridge as the 7208 Models 2 and 12. Full interchange of
data is supported with the 7208 Models 2 and 12 on the AS/400 9402, 9404 and
9406 using the proper tape density.
Feature #6390 can be mounted in the system
unit or in expansion features #7117/#9117 (4XX models) and #5070/#5072 (5XX
models). It may be used for save/restore, alternate IPL, program distribution,
migration and 8mm cartridge tape exchange. Hardware data compression (HDC) is
supported.
(#9520) Base CD-ROM: The IBM 4X CD-ROM drive is a 600KB/sec internal
CD-ROM drive feature used for code distribution on the new AS/400 systems.
#9520 is included in the base on new system and MES upgrades to the AS/400
Advanced Series models. Maximum: One.
1/4-Inch Cartridge Tape Units as identified
below can be upgraded for use with the AS/400 Advanced Series models. Each kit
feature code identified includes the hardware that must be ordered to allow
physical installation of the tape device in the AS/400 Advanced Series model.
This upgrade can only be performed when a customer is upgrading from a C thru F
model to an AS/400 Advanced Series model. The from model feature must be
removed from the records.
off
9404/9406 Migration
Feature Old Feature Feature
Description Number Kit Number Model Quantity
-------------------- ------ ---------- ------- --------
525 MB 1/4-Inch Cartridge 6342 1378 4XX 1
525 MB 1/4-Inch Cartridge 6347 1378 4XX/5XX 1
525 MB 1/4-Inch Cartridge 6367 1378 5XX 1
525 MB 1/4-Inch Cartridge 7347 1378 4XX/5XX 1
525 MB 1/4-Inch Cartridge 8342 1378 4XX 1
525 MB 1/4-Inch Cartridge 8347 1378 4XX/5XX 1
Base 1/4-Inch Cartridge 9342 1378 4XX 1
Base Tape Replace 5343 1379 4XX 1
Base Tape Replace 5348 1379 4XX/5XX 1
1.2 GB 1/4-Inch Cartridge 6343 1379 4XX 1
1.2 GB 1/4-Inch Cartridge 6348 1379 4XX/5XX 1
1.2 GB 1/4-Inch Cartridge 6368 1379 5XX 1
1.2 GB 1/4-Inch Cartridge 7343 1379 4XX 1
1.2 GB 1/4-Inch Cartridge 7348 1379 4XX/5XX 1
1.2 GB 1/4-Inch Cartridge 8343 1379 4XX 1
1.2 GB 1/4-Inch Cartridge 8348 1379 4XX/5XX 1
Base 1.2 GB 1/4-Inch Cart 9343 1379 4XX 1
1.2 GB 1/4-Inch Cartridge 9348 1379 4XX/5XX 1
2.5 GB 1/4-Inch Cartridge 5349 1380 4XX/5XX 1
2.5 GB 1/4-Inch Cartridge 6344 1380 4XX 1
2.5 GB 1/4-Inch Cartridge 6349 1380 4XX/5XX 1
2.5 GB 1/4-Inch Cartridge 7344 1380 4XX 1
2.5 GB 1/4-Inch Cartridge 6369 1380 5XX 1
2.5 GB 1/4-Inch Cartridge 7349 1380 4XX/5XX 1
2.5 GB 1/4-Inch Cartridge 8344 1380 4XX 1
2.5 GB 1/4-Inch Cartridge 8349 1380 4XX/5XX 1
Included in the base of each system unit is a
Multi-Function I/O Processor (MFIOP). It controls the CD-ROM (#9520) and one
tape device. Additional tape controllers may be selected.
(#2624) Storage Device Controller: (For IBM US, No Longer Available as of March 31,
1999)
The #2624 is capable of controlling all
supported internal tape devices. When used in the system units the #2624
controls two internal tape devices. When used in the expansion towers the #2624
controls up to three internal tape devices
#6146 (Diskette Adapter) may be added to any
#2624 for the purpose of controlling an external diskette. The addition of
#6146 to #2624 does not reduce the #2624s ability to control internal tape. In
addition, #6146 and #2624 can be used for the sole purpose of controlling
external diskette when no internal tape is present. For more information see
the description of feature #6146.
(#2621) Removable Media Device
Attachment: (For IBM
US, No Longer Available as of June 30, 2000)
This feature for Models 40S, 50S, and 53S is
tape/optical adapter that provides attachment capability and hardware data
compression (HDC) for the following tape devices:
One #2621 supports the following combinations
of tape/optical devices
The best performance can be obtained when the 9427
is attached to both ports of the #2621. This configuration does not allow the
attachment of the 2440-A12, 7208-XXX or 9348-XXX.
Card slots required: One
(#2644) 34XX Magnetic Tape
Attachment/HP: (For
IBM US, No Longer Available as of March 31, 1999)
This feature for the Models 40S, 50S, and 53S,
provides a S/370 Channel interface for attachment of the following devices:
Card slots required: One. #9980 (Serpentine
Cable) is required for attaching all #2644 supported devices except the
3490E-CXX. The 3490E-CXX is attached using #9980 when "External
Cables" were ordered on the 3490E-CXX. When "Internal Cables"
were ordered on the 3490E-CXX the #9980 is not required.
(#6501) Tape/Disk Device Controller: (For IBM US, No Longer Available as of July 31,
2001)
This feature provides a SCSI interface for
attachment of the following devices:
Card slots required: One. Maximum number of
tapes per IOP is two, one per port. Two tape devices of the same or different
machine type are allowed to share a common IOP. You CANNOT mix tape and disk
units on the same IOP.
(#6534) Magnetic Media Controller: (For IBM US, No Longer Available as of May 31,
2001)
#6534 is an Ultra SCSI Tape IOP that provides
attachment capability for the following external tape devices, on Models 40S,
50S, and 53S. #6534 will be the default tape controller for systems with V4R1.
#6534 can attach one tape drive. Tape devices that require two ports of
attachment to the AS/400 require #2621.
Card slots required: One.
Diskette support is provided by the #6146,
#6147 and #6112 adapters. #6146 and #6147 provide support for one diskette and
#6112 provides support for up to two diskettes.
(#6146) Diskette Adapter: (For IBM US, No Longer Available as of August
31, 1998)
This adapter is used to support one of the
following diskette types:
#6146 can be added to the Storage Device
Controller (#2624) on Models 40S, 50S, or 53S, or the MFIOP on the Model 40S.
The addition of #6146 to #2624 does not reduce the #2624s ability to control
internal tape. In addition, #6146 and #2624 can be used for the sole purpose of
controlling external diskette when no internal tape is present. For more
information see the description of #2624.
Note: Cable P/N 46G3658 is required for attaching #6146 to the diskette
device.
(#6054) Workstation Adapter (for
LocalTalk): Supported
by migration only, this feature consists of one card and a connector that
provide attachment to a LocalTalk network. Each adapter supports attachment of
31 devices and 56 sessions. Although the Workstation Adapter can physically
connect up to 31 devices, the recommended performance limitation is 20 active
sessions. The Workstation Adapter attaches to feature #2623. Maximum: One per
#2623.
(#8054) Workstation Adapter (for
LocalTalk): Supported by
migration only, this feature consists of one card and a connector that provide
attachment to a LocalTalk network. The adapter supports attachment of 31
devices and 56 sessions. Prerequisite #9171 or #9172. Maximum: One per MFIOP.
(#6141) ASCII Workstation
Controller: (For IBM
US, No Longer Available as of March 31, 1999)
This feature is a 6-port workstation
controller and workstation adapter with a 10 foot attachment cable for
attaching ASCII displays and printers. Up to 6 ASCII devices may be directly
attached per #6141. Requires one I/O card slot.
(#6054, #8054, #6141) Worktation
Controller Feature Maximums:
Maximum Maximum Maximum Total
Model Twinaxial ASCII LocalTalk Maximum
----- --------- -------- --------- -------
40S 0 1(1) 1(2) 2
1. Only allowed with #9172 or #9173 (Base MFIOPs)
2. Only allowed with #9171 or #9172 (Base MFIOPs)
(#6180) Twinaxial Workstation IOA: (For IBM US, No Longer Available as of July 31,
2001)
The Twinaxial Workstation IOA provides support
for seven 5250 type displays or printers. It supports the 5250 Express Data
Stream which provides enhanced twinaxial device throughput to supported
devices. One #6180 is allowed in slot C of the MFIOP unless the system console
is ASCII. All other Twinaxial Workstation IOAs must be placed into #2629s.
#9280 is specified on new orders by the
configurator when a twinaxial workstation is required and an ASCII workstation
controller is not specified. #6180 is specified for the twinaxial workstation
controller if the customer requires both a twinaxial workstation controller and
an ASCII workstation controller. #6180 requires OS/400 V4R1. Includes 20-foot
attachment cable/8-port breakout box.
(#9171) Standard MFIOP/ASCII Workstation
Controller: This base
system specify selects the MFIOP that includes an ASCII workstation controller
with a 10ft attachment cable providing 6 ASCII ports for attaching ASCII
displays and printers. Up to 6 devices may be directly attached. Feature #9171
is mutually exclusive with #9172, #9173, #9176 and #9177.
(#9172) Standard MFIOP/Twinaxial
Workstation Controller:
(For IBM US, No Longer Available as of August 31, 1998)
This base system specify selects the MFIOP
that includes a 2-port twinaxial workstation controller for attaching 5250 type
displays and printers. Up to 14 devices may be attached. Feature #9172 is
mutually exclusive with #9171, #9173, #9176 and #9177.
(#9173) Standard MFIOP/LocalTalk: This base system specify selects the MFIOP that
includes a LocalTalk workstation adapter for attaching to a LocalTalk network.
32 devices and 56 sessions are supported. Feature #9173 is mutually exclusive
with #9171, #9172, #9176 and #9177.
(#9176) Base MFIOP: This base system specify selects the MFIOP that
supports the Client Access/400 Console option. This MFIOP should be selected
when a LAN only system is desired with separate I/O processors to support the
LAN. The Client Access/400 Console option is required. Feature #9176 is
mutually exclusive with #9171, #9172, #9173 and #9177.
(#9177) Base MFIOP/LAN: This base system specify selects the MFIOP that
supports the Client Access/400 Console option with the low-cost LAN I/O
adapters. The Client Access/400 Console option is required. Feature #9177 is
mutually exclusive with #9171, #9172, #9173 and #9176.
The Client Access/400 Console option allows
attachment of a PC as the system console for the AS/400. Previously, the
choices for system console were twinaxial, ASCII and LocalTalk. The Client
Access/400 Console is now an additional option. The attachment is via an
asynchronous communication line on the AS/400 to the serial port, standard on
most PCs, using new console attachment cables. Client Access/400 software is
required for a PC to provide the system console function.
This new option is ideal for LAN based systems
because the PC being used as the system console can also be attached to the
AS/400 via a LAN. This eliminates the need to purchase a separate device for
use as the system console (or an emulation adapter if a PC was to be used as
the system console).
To implement the Client Access/400 Console on
Model 40S, specify the Base EIA 232/V.24 Two-Line Adapter (#9609) and a Console
Attachment Cable (#9026 or #9027) for attaching the AS/400 to the PC
asynchronous port.
(#2617, #9617) Ethernet/IEEE 802.3
Network Adapter/HP:
(For IBM US, #2617 No Longer Available as of March 31, 1999)
(For IBM US, #9617 No Longer Available as of
October 30, 1998)
The Ethernet/IEEE 802.3 Adapter/HP provides a
single attachment to one Carrier Sense Multiple Access/Collision Detect Local
Area Network.
The feature consists of an adapter card and
internal code which supplies Ethernet version 2 and IEEE 802.3 Media Access
Control (MAC) plus IEEE 802.2 Logical Link Control (LLC) functions.
Specify #9617 for Ethernet/IEEE 802.3
Adapter/HP as the base LAN. Order feature #2617 as an optional feature LAN.
I/O Card Slots Used: One. Maximums: See table
at the end of this section.
Cable: A vendor AUI Ethernet cable must be
ordered separately.
(#2618, #8664) Fiber Distributed Data
Interface Adapter:
(For IBM US, No Longer Available as of August 31, 1998)
This feature provides one interface to connect
an AS/400 System to an FDDI LAN which complies with ANSI X3T9.5 and ISO 9314
standards. Feature #2618 consists of a card, a wrap connector and Licensed
Internal Code which supplies IEEE 802.2 Logical Link Control (LLC), ANSI
X3T9.5/ISO 9314 Media Access Control (MAC) functions, and ANSI X3T9.5 Station
Management (SMT) functions (draft version 7.2 level which is compatible with
version 6.2).
Specify #8664 for Fiber Distributed Data
Interface Adapter as the base LAN on models 50S and 53S. This is a delta priced
feature. Order feature #2618 as feature LAN
I/O Card Slots Used: One. Maximums: See table
at the end of this section.
Cables: The FDDI Adapter requires multi-mode
(62.5/125 micron) FDDI optical fiber jumper cables to connect the adapter into
the FDDI ring. These jumper cables are not provided with this feature. Jumper
cables are the responsibility of the customer and may be ordered from your
local authorized IBM cabling distributor or by calling 1-800-IBM-2468 in the
United States. For EMEA customers, cables are available from Montpellier
through CE offerings.
(#2619, #9619) 16/4 Mbps Token-Ring
Network Adapter/HP:
(For IBM US, #2619 No Longer Available as of March 31, 1999)
(For IBM US, #9619 No Longer Available as of
October 30, 1998)
The 16/4 Mbps Token-Ring Network Adapter/HP
feature provides a single attachment to either a 16 Mbps or a 4 Mbps IBM
Token-Ring Network. The feature consists of an adapter card, internal code
which supplies IEEE 802.5 Media Access Control (MAC) and IEEE 802.2 Logical
Link Control (LLC) functions, and an external 2.44 meter (8 foot) cable. The
standard IBM Cabling System patch cables can increase the length where
necessary.
Specify #9619 for 16/4Mpbs Token-Ring Network
Adapter/HP as the base LAN on models 50S and 53S. Order feature #2619 as
feature LAN.
I/O Card Slots Used: One. Maximums: See table
at the end of this section.
Cables: One Token-Ring Network attachment 2.44
meter (8-foot) cable.
(#2629) LAN/WAN/Workstation IOP: Supports attachment of three IOAs
One #2629 will support one of the following
combinations of adapters:
No more than seven #2629s can be placed into
each System Unit Expansion Tower (#5072). #2629 is not allowed in slot 14 of
tower #5072. The #2629 is not restricted when used in the System Unit Expansion
Tower (#5073). OS/400 V4R1, or later is required.
(#2663) I/O Attachment Processor: (For IBM US, No Longer Available as of August
31, 1998)
This feature provides the communications
hardware base for the AS/400 Wireless LAN Adapter (#2668). The two features are
integrated in a single hardware package to operate as a unit. Feature #2663
consists of a new I/O processor card that provides a connection to feature
#2668.
The I/O Attachment Processor is a prerequisite
for feature #2668. Refer to feature #2668 for usage guidelines and maximums.
I/O card slots required: One (shared with
feature #2668).
(#2665, #8665) Shielded Twisted-Pair
Dist Data Interface Adapter:
(For IBM US, No Longer Available as of July 1, 1997)
This feature provides one interface to connect
an AS/400 System to an FDDI LAN which is constructed of IBM Cabling System Type
1, 2, 6, or 9 shielded twisted-pair wiring. Feature #2665 consists of a card, a
wrap connector and Licensed Internal Code which supplies IEEE 802.2 Logical
Link Control (LLC), ANSI X3T9.5/ISO 9314 Media Access Control (MAC) functions,
and ANSI X3T9.5 Station Management (SMT) functions (draft version 7.2 level
which is compatible with version 6.2).
Specify #8665 for Shielded Twisted-Pair
Distributed Data Interface Adapter as optional base LAN on models 50S and 53S.
This is a delta priced feature. Order feature #2665 as feature LAN.
I/O Card Slots Used: One. Maximums: See table
at the end of this section.
Cables: The SDDI Adapter requires IBM FDDI
copper jumper cables to connect the adapter into the FDDI ring. These jumper
cables are not provided with this feature. Jumper cables are the responsibility
of the customer and may be ordered from your local authorized IBM cabling
distributor or by calling 1-800-IBM-2468 in the United States. For EMEA
customers, cables are available from Montpellier through CE offerings.
(#2668) AS/400 Wireless LAN
Adapter: (For IBM US,
No Longer Available as of August 31, 1998)
The AS/400 Wireless LAN Adapter provides
wireless connectivity from AS/400 systems to workstations or other systems
connected to a wireless LAN network. With a wireless LAN connection, end-users
can have roaming, portable access to the information they need, wherever they
are, within the area of local wireless radio coverage. In addition, the AS/400
Wireless LAN Adapter may be the preferred solution in situations where wiring
is expensive or impossible or where computing resource and device layouts
change periodically. Support is provided for portable and stationary PCs, for
specialized hand-held devices used for data collection, and for connections
between AS/400 systems.
The AS/400 Wireless LAN Adapter uses an
advanced technology, direct sequence, spread-spectrum radio operating in the
2.4 to 2.4835GHz band. The operating band may be different in some countries to
meet country regulations. Spread spectrum provides excellent resistance to
interference from other radio frequency (RF) sources.
Availability of this feature in any particular
country is dependent on current country radio frequency regulations and
certification for use by the country.
The AS/400 Wireless LAN Adapter comes with an
antenna and a cable for connecting the antenna to the adapter. The area of
coverage may be extended beyond the coverage provided by the antenna attached
to the adapter by adding AS/400 Wireless LAN Access Points to the network via
an unshielded twisted-pair wired backbone. In addition, access points may be
connected without wires, acting as wireless repeaters. Each adapter or access
point generates one cell of coverage area. Networks are designed to create
overlapping cells to ensure consistent coverage of the area desired. The AS/400
Wireless LAN Adapter allows transparent seamless movement from cell to cell
while maintaining a continuous host session.
The AS/400 Wireless LAN Adapter operates with
existing application software interfaces. Existing 5250 and LAN-oriented
applications can use the AS/400 Wireless LAN Adapter without change. When used
with the Portable Transaction Computers application changes to address the
smaller screen size of these devices may be desired.
The AS/400 Wireless LAN Adapter supports the
AS/400 family of wireless LAN and data collection devices. This family of
devices provides comprehensive connectivity solutions for attaching personal
computers and data collection devices to the AS/400 in a mobile, wireless
fashion. In addition to the AS/400 Wireless LAN Adapter, the following AS/400
wireless LAN networking devices are available from IBM:
For more information on the above devices, see
the sales manual pages for the 248X family of products.
The raw bit rate for the AS/400 Wireless LAN
Adapter is 2 Mbps, shared by all active devices in the network. The range
covered by one cell in most office environments is from 100 to 300 feet in all
directions, depending on the building structure, antenna type and antenna placement.
Outdoors, with a clear line-of-sight between yagi antennas, a range of up to
three miles may be achieved. The yagi antenna is available as a feature of the
2480 Access Points.
This feature consists of an I/O adapter card,
an antenna and a coaxial cable to attach the antenna. The following cable and
antenna choices are offered:
·
One of the following:
#9814 - 20-Foot Antenna Cable (For IBM US, No Longer
Available as of August 31, 1998)
#9815 - 50-Foot Antenna Cable (For IBM US, No Longer
Available as of August 31, 1998)
#9890
- Omni-Directional (360 degree) Antenna (For IBM US, No Longer Available as of
August 31, 1998)
#9891
- Hemispherical (180 degree) Antenna (For IBM US, No Longer Available as of
August 31, 1998)
#9892
- Directional (90 degree) Antenna (For IBM US, No Longer Available as of August
31, 1998)
The antenna cables and antennae are also
orderable as accessories.
Prior to the purchase of any of the AS/400
Wireless LAN family of products, it is highly recommended that a professional
site survey be conducted to determine appropriate radio frequency coverage and
assure an effective network configuration. The customer is responsible for
insuring that an appropriate site survey is conducted by an authorized network
designer and installer. IBM Availability Services (previously called IBM
Customized Operational Services - COS) is an IBM authorized site surveyor. To
find out more about site surveys and installation, contact your local COS
representative.
Feature #2663, I/O Attachment Processor, is a
prerequisite to this feature. I/O card slots used: One (shared with Feature
#2663). Maximums: Three. See LAN Feature Maximums table at the end of this
section.
(#2723) PCI Ethernet IOA: (For IBM US, No Longer Available as of December
28, 2001)
The PCI Ethernet IOA provides single
attachment to one Carrier Sense Multiple Access/Collision Detect Local Area
Network. An adapter card and internal code supply Ethernet Version 2 and IEEE
802.3 Media Access Control (MAC) plus IEEE 802.2 Logical Link Control (LLC)
functions. The Ethernet/IEEE 802.3 IOA can operate in half-or full-duplex mode.
#2723 has an RJ45 connector and a 15 pin
D-Shell connector for attachment of customer-supplied cabling. A vendor AUI
Ethernet cable or RJ45 twisted-pair cable must be ordered separately.
Prerequisite: #6617 (Integrated PC Server).
Requires OS/400 V4R2, or later. I/O Card Slots Used: None. PCI slots used: One.
Models: 40S, 50S, and 53S.
(#2724) PCI 16/4Mbps Token-Ring
IOA: The PCI 16/4Mbps
Token-Ring IOA provides a single attachment to either a 16 Mbps or a 4 Mbps IBM
Token-Ring Network. An IOA card and internal code supply IEEE 802.5 MAC and
IEEE 802.2 LLC functions. The 16/4 Token-Ring IOA can operate in half-or
full-duplex mode.
#2724 comes with a 2.44-meter (8-foot)
token-ring cable. Alternatively, you can attach a separately purchased
twisted-pair cable to the RJ45 connection on the IOA. The standard IBM Cabling
System patch cables can increase the length where necessary.
Prerequisite: #6617 (Integrated PC Server).
Requires OS/400 V4R2, or later. I/O Card Slots Used: None. PCI slots used: One.
Models: 40S, 50S, and 53S.
(#2810) LAN/WAN IOP: (For IBM US, No Longer Available as of May 31,
2001)
The LAN/WAN IOP is required for attaching the
following LAN/WAN PCI adapters:
·
#2838 PCI 100/10Mbps Ethernet IOA
#2810 is considered a high-workload IOP and
may be subject to configuration limitations. Card slots required: One. OS/400
V4R1, or later, is required.
(#2811) PCI 25Mbps UTP ATM: (For IBM US, No Longer Available as of May 31,
1999)
#2811 is a 25Mbps ATM PCI card that allows the
AS/400 to be attached into an ATM network using Unshielded Twisted Pair (UTP)
cabling. #2811 is a good choice if you want the benefits from the scheduling,
low- latency, and wide inter-connectivity of ATM, but do not require bit rates
higher than 25Mbps. In addition, many buildings are already wired with UTP
category 3 cabling. #2811 will typically be used where 25 Mbps speeds are
required over distances of less than 100 meters.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models 40S, 50S, and 53S. OS/400 V4R2, or later, is required.
(#2812) PCI 45Mbps Coax T3/DS3
ATM: (For IBM US, No
Longer Available as of May 31, 1999)
#2812 is a 45Mbps ATM PCI card that allows the
AS/400 to be attached into an ATM network using coax cabling and the T3/DS-3
interface. #2812 is a good choice if you want more performance than available
on the 25Mbps ATM but do not require the 155Mbps performance level. #2812 also
has lower initial connection cost and lower ongoing tariffs. #2812 will
typically be used where 45Mbps speeds are required over distances of less than
137 meters. This feature may not be available in all countries.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models 40S, 50S, 53S. OS/400 V4R2, or later, is required.
(#2815) PCI 155Mbps UTP OC3 ATM: (For IBM US, No Longer Available as of May 31,
2001)
#2815 is a 155Mbps ATM PCI card that allows
the AS/400 to be attached into an ATM network using the UTP-5 interface. This
interface is intended for connection to local area switches and direct
connection to service provider equipment. #2815 will typically be used where
155Mbps speeds are required over distances of less than 100 meters.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models 40S, 50S, 53S. OS/400 V4R2, or later, is required.
(#2816) PCI 155Mbps MMF ATM: (For IBM US, No Longer Available as of December
28, 2001)
#2816 is a 155Mbps ATM PCI card that allows
the AS/400 to be attached into an ATM network using the Multi-Mode Fiber (MMF)
62.5-micron interface. This interface is intended for connection to both local
area switches and direct connection to service provider equipment. #2815 will
typically be used where 155Mbps speeds are required over distances of less than
2 km.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models 40S, 50S, 53S. OS/400 V4R2, or later, is required.
(#2818) PCI 155Mbps SMF OC3 ATM: (For IBM US, No Longer Available as of May 31,
2001)
#2818 is a 155Mbps ATM PCI card that allows
the AS/400 to be attached into an ATM network using the Single-Mode Fiber (SMF)
9-micron interface. This interface is intended primarily for direct connection
to service provider equipment but can be used for local area switches. #2818
will typically be used where 155Mbps speeds are required over distances of from
16 km to 40 km.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models 40S, 50S, 53S. OS/400 V4R2, or later, is required.
(#2819) PCI 34Mbps Coax E3 ATM: (No Longer Available as of May 31, 1999)
#2819 is a 34Mbps ATM PCI card that allows the
AS/400 to be attached into an ATM network using coax cabling and the E3
interface. #2819 is a good choice if you want more performance than available
on the 25Mbps ATM but don't require the 155Mbps performance level. #2819 also
has lower initial connection cost and lower ongoing tariffs. #2819 is typically
used where 34Mbps speeds are required over distances of less than 137 meters.
This feature may not be available in all countries.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models 40S, 50S, 53S. OS/400 V4R2, or later, is required.
(#2838) PCI 100/10Mbps Ethernet
IOA: The PCI
100/10Mbps Ethernet IOA feature will allow the AS/400 to attach to standardized
100Mbps high speed Ethernet LANs and also allow attachment to existing 10Mbps
Ethernet LANs. The adapter comes with an RJ45 connector for attachment to UTP-5
media. This adapter requires the OS/400 V4R1, or later.
Prerequisite: #2810 LAN/WAN IOP. For each
#2838 adapter used on #6617 IPCS, one no-charge specify #0222 (100/10Mbps on
IPCS2) is required.
(#6149, #9249) 16/4Mbps Token-Ring
IOA: (For IBM US, No
Longer Available as of May 31, 2001)
The 16/4Mbps Token-Ring IOA feature provides a
single attachment to either a 16Mbps or a 4Mbps IBM Token-Ring network. The
feature consists of an IOA card, internal code which supplies IEEE 802.5 Media
Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions. The
16/4 Token-Ring IOA can operate in half or full-duplex mode.
#6149 and #9249 come with a 2.44-meter
(8-foot) token-ring cable. Alternatively, a customer supplied twisted-pair
cable can attach to the RJ45 connection on the IOA. The standard IBM Cabling
System patch cables can increase the length where necessary. #9249 is the base
LAN option offered on the Models 40S, 50S, and 53S. This feature attaches only
to the Integrated PC Server (#6616).
(#6181) Ethernet/IEEE 802.3 IOA: (For IBM US, No Longer Available as of July 31,
2001)
(#9381) Ethernet/IEEE 802.3 IOA: (For IBM US, No Longer Available as of December
28, 2001)
The Ethernet/IEEE 802.3 IOA provides a single
attachment to one Carrier Sense Multiple Access/Collision Detect LAN. The
feature consists of an adapter card and internal code that supplies Ethernet
version 2 and IEEE 802.3 Media Access Control (MAC) plus IEEE 802.2 LLC
functions. The Ethernet/IEEE 802.3 IOA can operate half-or full-duplex mode.
#6181 and #9381 have a RJ45 connector and a
15-pin D-Shell connector for attachment to customer-supplied RJ45 twisted-pair
cable or AUI Ethernet cable. #9381 is the base LAN option offered on Models
40S, 50S, and 53S. This feature attaches only to the Integrated PC Server
(#6616).
The File Server I/O Processor, along with
supporting AS/400 software, provides a high performance, client-centered file
system. This file system provides access to client platforms such as OS/2,
Windows and DOS attached to Token-Ring and Ethernet LANs. The file system can
also be accessed by AS/400 host applications and provide LAN communications to
AS/400 applications using TCP/IP and APPN.
The FSIOP can leverage OS/2 LAN server
implementations to provide fast file serving performance on LANs. PC file
serving performance on the AS/400 is increased up to eight times over previous
AS/400 offerings.
The FSIOP consists of various initial order
configurations that can be upgraded in the field using separate memory and
second-port upgrade features.
The following optional base features are
available for the Models 40S, 50S, and 53S:
The following optional add-on features are
available for the Models 40S, 50S, and 53S:
The following features are available for
upgrading the capability of File Server I/O Processors:
·
#6509 - Additional 16 MB FSIOP Memory From one
to three features may be installed up to the FSIOP memory maximum of 64 MB.
Each LAN port can be configured to support one
of the following interfaces:
off
Protocol Connector Media
-------------------- ------------- ---------------
4/16 Mbps Token-Ring 9-pin D-Shell STP
4/16 Mbps Token-Ring RJ45 UTP
10 Mbps Ethernet 15-pin D-Shell 10Base5 / AUI
10 Mbps Ethernet 15-pin D-Shell 10Base2 / External
Transceiver
10 Mbps Ethernet RJ45 10BaseT
Cables: One or two of the following LAN cables
are included with the FSIOP and should be specified when ordering. One cable is
included with a One-Port FSIOP and upgrade feature #6520. Two cables are
included with the Two-Port FSIOPs. (Note: If using the RJ45 connection, a
specify cable is not required.)
The File Server I/O Processor features require
the support of OS/400 Version 3 Release 1.0, or later. Each FSIOP feature also
requires the licensed program, LAN Server/400 (5763-XZ1).
Card slots required: Two. Maximums: See LAN
Feature Maximums table at the end of this section.
(#6616) Integrated PC Server: (For IBM US, No Longer Available as of March 31,
1999)
The Integrated PC Server is the next step in
the evolution of the file serving IOP family. It contains a 166MHz Pentium
processor, two IOP memory card slots, and two LAN IOA slots.
Each IOP memory slot can contain either a 32MB
or a 128MB card, producing a range of IOP memory capacity from 32MB up to
256MB. At least one IOP memory feature card is required. The IOP memory feature
cards are:
Each LAN IOA slot can contain either a
Token-Ring IOA or an Ethernet IOA. At least one LAN IOA feature is required.
The Integrated PC Server is capable of supporting two IOAs in any combination.
The features for the LAN IOAs are:
Prerequisites: At least one memory feature
(either #2861 or #2862) and at least one LAN feature (either #6149/#9249
Token-Ring, #6181/#9381 Ethernet). For Model 40S, #9116 (High-Performance
Enabler) is required if #7108/#9108 (Expansion Gate) is on the system. Also
requires OS/400 V3R7 with cumulative PTF package C7029370, or later, for Models
40S, 50S, and 53S. #6616 requires two IOP slots.
(#6617) Integrated PC Server: (For IBM US, No Longer Available as of May 31,
1999)
The Integrated PC Server (#6617) is the next
step in the evolution of the IBM's File Serving IOP (FSIOP) family. It includes
a 200MHz Pentium Pro processor, four IOP memory slots, and three LAN IOA slots.
#6617 comes with a special cable that converts the connector on the back of the
card to industry-standard keyboard, mouse, serial and parallel connectors, for
use with Windows NT Server.
Each IOP memory card slot can contain either a
32MB IOP memory card or a 128MB IOP memory card producing a total IOP memory
capacity ranging from 32MB to 512MB. At least one memory card is required. A
minimum of 64MB is required to run Windows NT Server. The feature numbers for
the IOP memory cards are as follows:
Each LAN IOA slot can contain a PCI Token-Ring
IOA, a PCI Ethernet IOA or the PCI 100/10Mbps Ethernet IOA. The Integrated PC
Server can support all three IOAs in any combination. At least one LAN IOA
feature is required. Max of two 100/10Mpbs Ethernet IOAs. The features for the
LAN IOAs are as follows:
All three PCI slots can be used for Integrated
PC Server functions (maximum of two on the Model 40S). Two of the three PCI
slots can support native AS/400 functions. Maximum of one 100/10Mbps Ethernet
IOA in the two native AS/400 slots. Two total 100/10Mbps Ethernet IOAs.
#6617 requires three IOP slots.
#6617 cannot be placed in #5044.
If running NT operating system on #6617, then;
http://www.as400.ibm.com
A display, keyboard, and mouse are required to
install NT on feature #6617.
If running other than NT on #6617, then:
Models: 40S, 50S, and 53S. OS/400 V4R2, or
later, is required.
(#6618) Integrated Netfinity Server for
AS/400: The Integrated
Netfinity Server (#6618) contains a 333MHz Pentium II processor, four main
storage slots, and three LAN IOA slots.
Each memory card slot can contain either a
32MB memory card, a 128MB memory card, or a 256MB memory card producing a total
memory capacity ranging from 32MB to 1GB. At least one memory card is required.
The feature numbers for the memory cards are as follows:
Each LAN IOA slot can contain a PCI Token-Ring
IOA, a PCI Ethernet IOA, or the PCI 100/10Mbps Ethernet IOA. The Integrated
Netfinity Server can support all three IOAs in any combination, with a maximum
of two #2838/#9738. At least one LAN IOA feature is required. The features for
the LAN IOAs are as follows:
Note:
All three PCI slots can be used for Netfinity
server functions. Two of the three PCI slots can support native AS/400
functions.
#6618 requires three IOP slots. #6618 cannot
be placed in #5044 (System Unit Expansion Rack).
If running NT operating system on #6618, then;
If running OS/2 operating system on #6618,
then;
If running Novell NetWare on the #6618, a
maximum of 256MB IOP memory is supported.
OS/400 V4R2 with PTF package C8349420, or
later, or V4R3 with PTF package C8349430, or later, is required.
off
Maximum Number of LAN IOPs
Usage 40S
--------------------------------------------------------------------
((#6526+#6527+#6528+#6529+#8726+
#8727+#8728+#8729) X 2) +
#2617+#2618+#2619+#2626+#2665+
#8665+#9617+#9619+#6516+#6517+ 3(1) LAN Port
#6518+#6519+#8716+#8717+#8718+
#8719+#2668+#6520+#6149+#9249+
#6181+#8664+#9381+#6616
#2723+#2724
#6526+#6527+#6528+#6529+#8726+
#8727+#8728+#8729+#6516+#6517+ 1 8 16 FSIOPs
#6518+#6519+#8716+#8717+#8718+
#8719+#6616
#9617+#8664+#8665+#9619+#9249+ 1 1 1 Base LAN
#9381+#8726+#8727+#8728+#8729+
#8716+#8717+#8718+#8719
(1)Three LANs are allowed when running IBM Firewall for AS/400 (5769-FW1)
(#9171, #9172) Base MFIOP
ASCII/Twinaxial: This
base Model 40S MFIOP, with either ASCII or twinaxial support (#9171/#9172),
includes a workstation controller with support for two of the following
adapters:
(#9173) Base MFIOP/LocalTalk: This base Model 40S MFIOP, with LocalTalk
support (#9173), includes a workstation controller and support for one of the
following adapters:
(#9176) Base MFIOP: This base Model 40S MFIOP (#9176) with no
workstation support, can support two of the following adapters:
The following combinations of adapters are
supported: Two EIA 232 lines are required. One for Client Access console, the
other for ECS.
(#2623) Six-Line Communications
Controller: (For IBM
US, No Longer Available as of March 31, 1999)
The Six-line Communications Controller
provides for the attachment to Models 40S, 50S, and 53S of the following
communications adapters:
One #2623 will support one of the following
combinations of adapters:
(#2666) High-Speed Communications
Adapter: (For IBM US,
No Longer Available as of August 31, 1998)
This feature provides AS/400 with one
communications line capable of T1/E1 (1.544/2.048 Mbps) speeds. This feature
consists of a card, a wrap connector, and a cable. Three physical interface
types are offered. The cable type plugged into the adapter determines which
interface will be used. One of the following cable must be specified when
ordering feature #2666:
Note 1: These cables will ONLY be allowed when
the customer's DCE (Modem) supports "Looped Clocking" mode.
For changes after initial installation these
cables are also be available as accessories.
The maximum number of communication adapters
is dictated by the total number of communication lines supported by model as
follows:
off
Max
Total Total Max T1/E1/J1 Lines (3) #2623+ Max other
Comm High Speed < or = #2666 High Speed
Model Lines Lines 384Kbps 512Kbps 640Kbps (2) Lines (1)
---------- ----- ---------- ------- ------- ------- ----- ----------
40S 20 6 6 4 2 2 6
Notes:
1.
These are X.21/V.35/ISDN lines which support BSC, X.25, IDLC
and SDLC at speeds greater than 19.2Kbps up through 64Kbps. An ISDN adapter is
counted as two lines when determining the number of lines supported.
2. This is the combined number of #2666 and #2623
features supporting T1/E1/J1 speeds.
3. The Six-Line Communications Controller (#2623)
supports up to three V.35 SDLC data lines for attachment to T1/E1/J1 facilities
through appropriate Data Communications Equipment (DCE). Support per
controller:
o
One V.35 SDLC data line
operating at speeds up to 640Kbps
o
Two V.35 SDLC data
lines operating at speeds up to 512Kbps
o
Three V.35 SDLC data
lines operating at speeds up to 384Kbps
(#2605) ISDN Basic Rate Interface
Adapter: (For IBM US,
No Longer Available as of March 31, 1999)
This feature consists of an adapter and one
20-foot cable used to attach one communications line to an ISDN network. The
ISDN Basic Rate Interface supported by #2605 contains two high-speed ISDN user
channels.
(#2609) EIA 232/V.24 Two-Line
Adapter: (For IBM US,
No Longer Available as of March 31, 1999)
This feature consists of an adapter used to
attach two communication lines using Async, BSC, SDLC, or X.25 protocols and a
CYGNET fanout cable.
Specify two of the following in any
combination.
(For IBM US, No Longer Available as of March 31,
1999)
(For IBM US, No Longer Available as of March 31,
1999)
(For IBM US, No Longer Available as of March 31,
1999)
(For IBM US, No Longer Available as of March 31,
1999)
(#2610) X.21 Two-Line Adapter: (For IBM US, No Longer Available as of March 31,
1999)
This feature consists of an adapter used to
attach two communication lines to an X.21 or X.25 network and a CYGNET fanout
cable.
Specify two of the following in any combination.
(For IBM US, No Longer Available as of March 31,
1999)
(For IBM US, No Longer Available as of March 31,
1999)
(#2612) EIA 232/V.24 One Line
Adapter: (For IBM US,
No Longer Available as of March 31, 1999)
This feature consists of an adapter used to
attach one communication line using ASYNC, BSC, SDLC, or X.25 protocols.
Specify one of the following:
(For IBM US, No Longer Available as of March 31,
1999)
(For IBM US, No Longer Available as of March 31,
1999)
(For IBM US, No Longer Available as of March 31,
1999)
(For IBM US, No Longer Available as of March 31,
1999)
Note: This feature is also used in conjunction with the Client Access console
when #5543 is specified. Cable #9026 or #9027 is required.
(#2613) V.35 One-Line Adapter: (For IBM US, No Longer Available as of March 31,
1999)
This feature consists of an adapter used to
support one V.35 Communication line using either BSC, SDLC, or X.25 protocols.
Specify one of the following:
(For IBM US, No Longer Available as of March 31,
1999)
(For IBM US, No Longer Available as of March 31,
1999)
(#2614) X.21 One-Line Adapter: (For IBM US, No Longer Available as of March 31,
1999)
This feature consists of an adapter used to
attach one communication line to an X.21 or X.25 network.
Specify one of the following:
(For IBM US, No Longer Available as of March 31,
1999)
(For IBM US, No Longer Available as of March 31,
1999)
(#2699) Two-Line WAN IOA: (For IBM US, No Longer Available as of December
28, 2001)
#2699 supports up to two multiple protocol
communications ports when one or two (in any combination) of the following
cables are attached.
#2699 Requires an unused IOA slot on a #2629
as a prerequisite. OS/400 V4R1, or later, is required. #2699 can be ordered
with either one or two cables.
(#8609, #9609) Base EIA 232/V.24
Two-Line Adapter: This
feature consists of an adapter and a 10ft two-connector stub cable used to
attach two communication lines using ASYNC, BSC, SDLC, or X.25 protocols.
Available on the Model 40S.
Specify one of the following cables for ECS if
using an IBM modem:
Additionally specify one of the following
cables (or two if NOT using an IBM modem) for the 2nd line:
Alternatively, on new build and model upgrade
only specify one of the following cables for the 2nd line for client access
console:
Maximum of one #8609/#9609/#9612 per system.
(#9612) EIA 232/V.24 One-Line
Adapter: (For IBM US,
No Longer Available as of October 30, 1998)
#9612 is a base specify for all models. This
is used as the communications line for ECS. Specify one of the following:
Note: This feature is also used in conjunction with the Client Access Console
#5543 is specified. Cable #9026 or #9027 is required.
(#2664) Integrated Fax Adapter: (For IBM US, No Longer Available as of December
31, 1999)
The Integrated Fax Adapter allows facsimile
data to be entered, stored, retrieved, received and printed by the AS/400.
Sending a FAX is as easy as printing or sending E-mail. This feature provides
the AS/400 with two ports capable of transmission and receipt of facsimile data
to or from a Group 3 capable fax machine, another AS/400 with an Integrated Fax
Adapter, or PCs with appropriately programmed fax adapters. Feature #2664
consists of a card, a wrap cable (one per machine), two country- unique
attachment couplers, telephone cables and Licensed Internal Code.
The Integrated Fax Adapter is supported by the
Facsimile Support/400* licensed program offering that also supports a PS/2
LAN-based facsimile product. This program provides configuration parameters for
the Integrated Fax Adapter, schedules fax transmissions between multiple
adapters, and manages sending and receiving faxes to and from the adapter. The
Integrated Fax Adapter and the PS/2 product can coexist. The Integrated Fax
Adapter offers the advantages of being simpler to install, operate and manage
since it is an integrated feature of the AS/400.
The Integrated Fax Adapter can simultaneously
support two send, two receive, or one send and one receive operation. To the
AS/400, the Integrated Fax Adapter appears as an IPDS* (Intelligent Printer
Data Stream) printer for outbound faxes. Most output, including text, image,
graphics and bar codes that can be printed on an AS/400 IPDS printer can be
faxed via the Integrated Fax Adapter. Double Byte Character Sets (DBCS) are
supported for in-bound faxes, but not for out-bound faxes.
Documents transmitted from the AS/400 through
the Integrated Fax Adapter are limited to a maximum of approximately 30 text
pages per port, per phone call. If two ports are configured for sending Fax
documents and only one is being used, then the limit is raised to approximately
60 text pages. Resident cover pages are counted against this limit. A4, A3, and
B4 page sizes are supported. The A3 page size is truncated to B4 on transmit.
The Integrated Fax Adapter is designed to be
directly attached to the Public Switched Telephone Network (PSTN). Attachment
to a Private Branch Exchange (PBX) may give unsatisfactory results.
Feature #2664 supports the facsimile protocols
defined in CCITT Blue Book Volume VII, Fasicle VII.3 Recommendations T.4 and
T.30.
Feature #2664 supports the following compression
algorithms in fax mode:
Feature #2664 supports the following modem
standards:
Availability of this feature in any particular
country is dependent on homologation approval in that country. Two
country-unique couplers and country-specific Public Switched Telephone Network
(PSTN) attachment cables (one for each port), are required. The couplers and
cables are included with the Integrated Fax Adapter feature.
Facsimile Support/400 Version 3 Release 0.5,
or later is required to support this feature. Card slots used: One. Maximums:
See the AS/400 model summary table.
(#2620) Cryptographic Processor: (For IBM US, No Longer Available as of December
31, 1999)
The Cryptographic Processor feature performs
cryptographic functions based on a hardware implementation of the ANSI standard
Data Encryption Standard (DES) and the RSA Public Key Algorithm (PKA).
Cryptographic applications are a cost-effective way of providing
confidentiality and/or authentication and integrity assurance for many forms of
valuable data. This protection is especially important in networks, which may
be vulnerable to unauthorized access to data and resources. Application areas
include banking, Electronic Data Interchange (EDI) and protection of
proprietary information such as engineering drawings, customer lists, product
plans, and personnel records.
Functions provided include encryption and
decryption of data, authentication and verification of messages and data,
creation and management of financial personal identification numbers (PINs) and
management of cryptographic keys. The Public Key Algorithm supports the
generation and verification of digital signatures for applications requiring
positive electronic authentication of the identity of the sender of a message.
The PKA function also provides efficient distribution of encrypted DES
cryptographic keys.
Control of the tamper-resistant cryptographic
hardware is provided through the supporting PRPQs listed below and optionally,
through IBM Personal Security Cards using the IBM 4754-001 Security Interface
Unit. The cryptographic functions provided conform to the IBM Common
Cryptographic Architecture, are compatible with the IBM Transaction Security
System, and interoperate with most DES based cryptographic products including
IBM cryptographic products on MVS, RS/6000 (WT only), OS/2 and DOS and the IBM
Cryptographic Support/400 licensed program (5728-CR1, 5738-CR1, 5763-CR1).
Through its extensive use of industry standards, the cryptographic processor
also interoperates with most other DES based cryptographic products.
This feature consists of an I/O processor card
with a cable to attach a 4754-001, and a cable wrap connector (1 per system).
The 4754-001, if desired, must be ordered separately.
Export authorization from the U.S. Government
is required to ship this feature to countries outside the U.S. and Canada.
Other countries may also regulate the export of this feature. Export licenses
for feature #2620 will generally be approved for shipment to financial
institutions and subsidiaries of U.S. companies. Export of feature #2628 may be
approved in other cases. Check with your local export regulation coordinator
for specific country requirements.
This feature requires the support of OS/400
Version 3 Release 1.0 or later, and PRPQ 5799-XBY. Feature #2620 is not
supported by IBM Cryptographic Support/400.
Publications: For additional information refer
to the following:
Card slots required: One. Maximums: One.
(#2628) Cryptographic Processor -
Commercial: (No Longer
Available as of December 31, 1999)
This feature provides the same functions as
feature #2620 except that the data confidentiality functions of encryption and
decryption are provided using the new Commercial Data Masking Facility (CDMF)
instead of the DES algorithm. CDMF is a new scrambling technique for data
confidentiality and is intended as a substitute for the Data Encryption
Standard (DES). CDMF complies with U.S. export regulations and will normally be
available to most customers in most countries.
CDMF uses a 64 bit key, but provides the
effective strength of a 40-bit DES key. Feature #2628 is fully compatible with
feature #2620 with the exception of the encryption and decryption commands.
Interoperability on masked data between an AS/400 with feature #2628 and an
AS/400 with feature #2620 or other full DES systems is not supported.
Feature #2628 supports attachment of the
4754-L01 Security Interface Unit. This feature consists of an I/O processor
card with a cable to attach a 4754-L01, and a cable wrap connector (1 per
system). The 4754-L01, if desired, must be ordered separately.
This feature requires the support of OS/400
Version 3 Release 1.0 or later, and PRPQ 5799-XBY. Feature #2628 is not
supported by IBM Cryptographic Support/400.
Publications: For additional information refer
to the following:
Card slots required: One. Maximums: One.
(#0059) Transition Data Link: (For IBM US, No Longer Available as of June 30,
2000)
The IBM Transition Data Link (TDL) feature
offers a twinaxial cable data path between IBM twinaxial systems. The TDL
allows for unattended migration of data from one system to another. The systems
are connected via their respective local twinaxial workstation controllers.
Data is transferred between the two systems at the system workstation
controller data interchange speed which averages approximately 40MB/hour.
The TDL is intended for use by a skilled user
in system operation. Migration software/application or programming is needed to
make the TDL move data between systems. The Transition Data Link User's Guide
(SC21-8372) is provided in English only.
Not available.
off
Description Part Number
----------- ---------
Async Modem Cable Japan 21F2674
Async Modem Cable Germany 21F2671
20 Ft EIA 232 Terminal/Printer 21F4505
40 FT EIA 232 Terminal/Printer 21F4342
100 FT EIA 232 Terminal/Printer 21F4346
20 FT EIA 232 IWS 21F9965
EIA 422 Surge Suppressor 21F4403
Port Tester Twinaxial 59X4262
Async Modem Cable 69X7016
UTP Matching Adapter 73G9865
Yagi Directional Antenna 74F0359
20 ft Antenna Cable 74F0360
50 ft Antenna Cable 74F0361
Omni-Directional (360 Degree) Antenna 74F0362
Hemispherical (180 Degree) Antenna 74F0363
Directional (90 Degree) Antenna 74F0364
EIA 232/V.24 Enhanced 20 ft Standard 74F0382
EIA 232/V.24 Enhanced 20 ft Japan 74F0383
EIA 232/V.24 Enhanced 20 ft Germany 74F0384
EIA 232/V.24 20 ft Standard 74F0385
EIA 232/V.24 20 ft Japan 74F0386
EIA 232/V.24 20 ft Germany 74F0387
X.21 20 ft Standard 74F0388
V.35 20 ft Standard 74F0389
RS 366 (Autocall) 20 ft Standard 74F0390
RS 366 (Autocall) 20 ft Japan 74F0391
EIA 232/V.24 Enhanced 50 ft Standard 74F0392
EIA 232/V.24 Enhanced 50 ft Japan 74F0393
EIA 232/V.24 Enhanced 50 ft Germany 74F0394
EIA 232/V.24 50 ft Standard 74F0395
EIA 232/V.24 50 ft Japan 74F0396
EIA 232/V.24 50 ft Germany 74F0397
X.21 50 ft Standard 74F0398
V.35 50 ft Standard 74F0399
EIA 232/V.24 Enhanced 80 ft Standard 74F1825
EIA 232/V.24 Enhanced 80 ft Japan 17G2577
EIA 232/V.24 Enhanced 80 ft Germany 17G2578
V.35 80 ft Standard 74F1827
6.1 M (20 ft) CCITT V.35 Cable 74F0370
24.2 M (80 ft) CCITT V.35 Cable 74F0371
6.1 M (20 ft) CITT V.36/EIA RS449 Cable 74F0372
24.2 M (80 ft) CCITT V.36/EIA RS449 Cable 74F0373
45.7 M (150 ft) CCITT V.36/EIA RS449 Cabl 74F0374
6.1 M (20 ft) CCITT X.21 74F0369
3M (9.8 ft) AUI Ethernet Cable 74F0366
2.4M (8 ft) 802.5 Token-Ring Cable 74F0367
7208 4M Attachment Cable 74F0365
20M Optical Cable for Connecting Towers 8192436
EIA 232 6m Client Access Console Cable 87G4564
EIA 232 2.5m Client Access Console Cable 87G4565
Not available.
Not available.
Tape Cartridges:
·
The 525MB 1/4-Inch Cartridge Tape Unit uses the IBM
DC6525 Data Cartridge (525MB), part number 21F8697 or equivalent and the IBM
DC6150 Data Cartridge, 21F8578.
Note: 8mm data cartridge media must meet the
proposed American National Standards Institute (ANSI) standard X3B5/89-136,
Unrecorded Magnetic Tape Cartridge for Information Exchange.
Cleaning Cartridges and Kits:
·
The 525MB 1/4-Inch Cartridge Tape Unit uses the IBM
.25-Inch Cleaning Cartridge Kit, part number 16G8572 or equivalent.
o
Note: This Cleaning Cartridge will NOT work in the
120MB or 525MB Tape Units.
Diskettes: The diskette units utilize the following IBM or
equivalent diskette media:
8-inch diskettes:
IBM Diskette 1
P/N 2305830 128 Bytes/Sector
IBM Diskette 2
P/N 2736700 256 Bytes/Sector
IBM Diskette 2D
P/N 1766872 256 Bytes/Sector
P/N 1669044 512 Bytes/Sector
P/N 1669045 1024 Bytes/Sector
5 1/4-inch diskettes:
IBM Diskette 2HC
P/N 6109660 80 Track/Double Sided
For more information on any of IBM's data
storage products, including media, cleaning cartridges, and media storage
accessories, within the USA and Canada, call 888-IBM-MEDIA (426-6334). In
Mexico, call 525-726-6203. Outside the USA, Canada, and Mexico, contact the
seller of IBM data storage products.
Trademarks: (R), (TM), * Trademark or registered trademark
of International Business Machines Corporation.
** Company, product, or service name may be a
trademark or service mark of others.
Windows is a trademark of Microsoft
Corporation.
UNIX is a registered trademark in the United
States and other countries licensed exclusively through X/Open Company Limited.